HiHoeSilver
Away!
It's a bolt style led. He put the shaft through the existing lens. Then he put them in blue under the truck. Then he put them in the cargo area. Then he used a pair as earrings. Still waiting on the nipple ones....
2005 Yukon XL - Puddle Light lens part 2 ... CLEAR!!
- Thread starter mountie
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It's a bolt style led. He put the shaft through the existing lens. Then he put them in blue under the truck. Then he put them in the cargo area. Then he used a pair as earrings. Still waiting on the nipple ones....
OP
OP
mountie
Supporting Member
Ha...... Uh, For him or "her"
The eagle eye "bolt" LED could be mounted as a puddle light, by drilling a hole through the puddle light lens housing? Huh... Where do I get that lens??
I thought 05Single fabricated a plate for the LED light..... Maybe I just missed that detail.
Last edited:
HiHoeSilver
Away!
Ha...... Uh, For him or "her"
The eagle eye "bolt" LED could be mounted as a puddle light, by drilling a hole through the puddle light lens housing? Huh... Where do I get that lens??
I thought 05Single fabricated a plate for the LED light..... Maybe I just missed that detail.
He may have. I can't remember exactly. Same thing, really.
OP
OP
mountie
Supporting Member
My above question " Where do I get that lens?"..... Opps.... Meant to ask, ( Where to get that eagle eye LED bulb )...... But I think I can figure that out......
So, here I am, writing this post ...... for very little reason....
So, here I am, writing this post ...... for very little reason....
Tonyrodz
Resident Resident
At least you're getting your post count up
.
05Single
afraid of the dark
- Joined
- Feb 26, 2015
- Posts
- 8,183
- Reaction score
- 11,448
My nipples are too small. They have the diameter but not the length. I'm pretty pissed about it. Thanks for bringing it up again
OP
OP
mountie
Supporting Member
The daylight front is LED ( works great)....Aftermarket tail light, reverse lens is clear so stock bulb very bright ( can't wait to get an LED for that )..... And, Puddle light lens polished clear, using #578 LED 'barrel bulb - frosted' / 6000k / also part called a "212-2 Type ??".....
So many versions of the 578 LED bulb online, hard to know what is actually a brighter light.... The barrel bulbs are only frosted / flat leds should be brighter?
"They describe" the LED "as whiter"..... I want BRIGHTER. Uh, CANBUS? Uh, 'error free'? Sure, but HOW ABOUT LUMINS?????
I think a 'panel style' LED 578 will be brighter for a puddle light, but which one??
So many versions of the 578 LED bulb online, hard to know what is actually a brighter light.... The barrel bulbs are only frosted / flat leds should be brighter?
"They describe" the LED "as whiter"..... I want BRIGHTER. Uh, CANBUS? Uh, 'error free'? Sure, but HOW ABOUT LUMINS?????
I think a 'panel style' LED 578 will be brighter for a puddle light, but which one??
Last edited:
05Single
afraid of the dark
- Joined
- Feb 26, 2015
- Posts
- 8,183
- Reaction score
- 11,448
I always searched 42mm festoon led bulb. Same as dome lights. Right now I have color changing ones in my dome. I never really cared to get the brightest because hopping into your truck in pitch black and having the dome lights turn into sunlight isn't what I was looking for lol. I ran blue for a long time. I have bright footwell lights and that's what's important for me
Last edited:
05Single
afraid of the dark
- Joined
- Feb 26, 2015
- Posts
- 8,183
- Reaction score
- 11,448
But I like jdm astar so if I did get some it would be these. 
HiHoeSilver
Away!
I used these. They are a bit wide, so I put them in on an angle, and they turned out exactly parallel to the ground.
They are pretty frigging bright.
4Pcs 800 Lumens Super Bright 42mm... https://www.amazon.com/dp/B078MLRNCX?ref=ppx_pop_mob_ap_share
