Part number for center console cup holder insert?
- Thread starter derekjl
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
east302
Full Access Member
Yes, it’s a direct drop-in for the CD storage thing. GM part number 12388413. They’re discontinued, but show up on eBay a good bit.
Look for one with the clips intact. They usually break, sending the bottom half of the cup holder down into the console along with whatever drink you just put in there. They can be epoxied together easily enough and be just fine, just don’t pay a premium for one that’s already busted.
It’s the ‘U’ shaped portion that breaks. This one is intact...
Sent from my iPhone using Tapatalk
Look for one with the clips intact. They usually break, sending the bottom half of the cup holder down into the console along with whatever drink you just put in there. They can be epoxied together easily enough and be just fine, just don’t pay a premium for one that’s already busted.
It’s the ‘U’ shaped portion that breaks. This one is intact...
Sent from my iPhone using Tapatalk
Kelsda
Full Access Member
Bought one from amazon China made but a lot cheaper than oem
Squirrelsmith
Full Access Member
- Joined
- Jan 21, 2018
- Posts
- 914
- Reaction score
- 788
thats what i did with mine. would be nice to have the rubber piece that goes in thereYes, it’s a direct drop-in for the CD storage thing. GM part number 12388413. They’re discontinued, but show up on eBay a good bit.
Look for one with the clips intact. They usually break, sending the bottom half of the cup holder down into the console along with whatever drink you just put in there. They can be epoxied together easily enough and be just fine, just don’t pay a premium for one that’s already busted.
It’s the ‘U’ shaped portion that breaks. This one is intact...
Sent from my iPhone using Tapatalk
Link please? I cannot find one on eBay or anywhere else.
Tbruz
Full Access Member
There are a couple on EBAY right now for 35 to 40 bucks.
Both appear to have some broken tabs and no rubber inserts
item numbers
302942969920 and
253983133756
You can also buy the rubber inserts on ebay for $10. They are a bit thinner than OEM but they do work.
eBay item number:
382630165208
I have one holder with broken back tab and no inserts you could have for $20 plus the ride from NH if you don't go the Ebay route above or a mint one for $50 +shipping.
Thanks
Tbruz
Both appear to have some broken tabs and no rubber inserts
item numbers
302942969920 and
253983133756
You can also buy the rubber inserts on ebay for $10. They are a bit thinner than OEM but they do work.
eBay item number:
382630165208
I have one holder with broken back tab and no inserts you could have for $20 plus the ride from NH if you don't go the Ebay route above or a mint one for $50 +shipping.
Thanks
Tbruz
I might take you up on that mint condition one. Can you send me pictures please?
Sent from my iPhone using Tapatalk
Tbruz
Full Access Member
Mint one is not glued and zero broken tabs.
this one is glued with broken tab and no rubber inserts but it does hold a bigger can/drink than the mint one
Thanks
Tbruz
this one is glued with broken tab and no rubber inserts but it does hold a bigger can/drink than the mint one
Thanks
Tbruz
Last edited:
