[Update 04/07] 2006 Yukon Denali Winter Beater [SOLD]

Really clean looking Denali! Keep up the good work.
Regards from Sweden

Bombsquad85 said:

I meant how do they compare to the factory lights

Click to expand...

the housings, or the bulbs?

LED bulbs I feel are a lot brighter, but don't have as far of a range, if that makes sense

for the housing, I feel like they are pretty much exactly the same in terms of light output

hopefully that helps

SwedeBurban said:

Really clean looking Denali! Keep up the good work.
Regards from Sweden

Click to expand...

Thank you <3

Always super cool to see GM lovers in other countries

from what I hear, these vehicles are kinda rare over seas!

Galandorian said:

the housings, or the bulbs?

LED bulbs I feel are a lot brighter, but don't have as far of a range, if that makes sense

for the housing, I feel like they are pretty much exactly the same in terms of light output

hopefully that helps



Thank you <3

Always super cool to see GM lovers in other countries

from what I hear, these vehicles are kinda rare over seas!

Click to expand...

And expensive.

Yesterday I got my shipment of deadener in

since I usually spend like $500/vehicle (Second Skin Damplifier, B-Stock) and only keep them for 2 months... I went the "cheap" route this time.

180 square feet of Amazon Noico 80mil for $319.95

unfortunately, it left some pretty sizable holes in the headliner, so I have to go check the junkyard and see if I can find some headliner with a Sunroof, without any dvd players

my box designs should be done this weekend, and then I can pay my guy to start working on A-Pillars, boxes, and front doors.

thinking 3 10" mids per front door currently

6 12" subs

about 10kw, and 100ah of lithium with a 390a alt

haven't had much time to put into the vehicle with all the hours I've been spending at work lately

that being said, I dropped off my panels and money to get my stuff built

so here's the design for the 6 12s:

went with 3 Eminence Delta 10A's and 2 Selenium ST200 tweeters per door

about to go deaden some more doors and try to get my head unit and backup camera installed

slowly but surely...

front doors deadened

just waiting on my fab guy now

spent the last few days working on head unit and wiring stuff, ugh.

GM did not make these vehicles with enough space back there for all the wires I try to jam in there

had to cut out the support again to be able to fit things

surprisingly put back together nicely

no sound right now though, because this vehicle has an OEM amp that I have to bypass still, but I just wanted to get the vehicle drivable again so I can drop it off and have my rims swapped hopefully this week

Galandorian said:

spent the last few days working on head unit and wiring stuff, ugh.

GM did not make these vehicles with enough space back there for all the wires I try to jam in there

had to cut out the support again to be able to fit things

View attachment 209720
View attachment 209721
head unit, Axxess ASWC-1 (to retain steering wheel controls) 3 RCAS, backup camera cables, oem cables, etc.

View attachment 209722

surprisingly put back together nicely

no sound right now though, because this vehicle has an OEM amp that I have to bypass still, but I just wanted to get the vehicle drivable again so I can drop it off and have my rims swapped hopefully this week

Click to expand...

I also had to rip out that metal support, which was sharp as hell! Just to fit my dd in.

Headunit looks great!

looks good man , really like the pioneer head units