Broken Motor Mounts

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mrsteef

Member
Joined
May 28, 2018
Posts
81
Reaction score
67
Nice!!! I bet your passenger mount is crushed.

I love/hate gm.

I know the drivers side is pretty much gone lol with that said I’m betting the passenger side is pulled apart
 

Mrsteef

Member
Joined
May 28, 2018
Posts
81
Reaction score
67
Drivers side750D0019-4AA2-428C-816B-C7A8440BB10A.jpeg 283CE395-0027-4EF7-8305-CAD949220EC8.jpeg 4885D23E-BFF6-4905-85ED-229F94FC7F43.jpeg
Passenger side
F5CDA536-E178-499F-8001-F34787AA13D7.jpeg 5887B1E9-F360-44E3-BBA5-39D0B92A04BF.jpeg

Also had the trans mount replaced because it was starting to crack as well. H3 passenger side mounts for both sides worked like a charm. Just another vouch!
 

tgui

Full Access Member
Joined
Feb 17, 2014
Posts
859
Reaction score
815
I’d say 85% less vibration for sure compared to the old broken mounts.

No more jerk motion when I get on the gas from a stop. And I don’t feel shifts nearly as much as I used to.

Fantastic!!! :D
 

tgui

Full Access Member
Joined
Feb 17, 2014
Posts
859
Reaction score
815
I just fired my Yukon up with the h3 mounts. Definitely less vibration than the poly. If it weren't for my wife I'd leave the poly in.
 

08grey

Full Access Member
Joined
Jun 17, 2012
Posts
4,596
Reaction score
725
I just got my poly mounts and am eager to install but worried about the vibration.
The drivers side oem mount is the mount I destroy every year or so and have to replace. I'm wondering if I should just install the poly mount on the drivers side and either stay with oem or h2 for the passenger side. Any opinions would be appreciated.

Sent from my SM-G950U using Tapatalk
 

tgui

Full Access Member
Joined
Feb 17, 2014
Posts
859
Reaction score
815
I just got my poly mounts and am eager to install but worried about the vibration.
The drivers side oem mount is the mount I destroy every year or so and have to replace. I'm wondering if I should just install the poly mount on the drivers side and either stay with oem or h2 for the passenger side. Any opinions would be appreciated.

Sent from my SM-G950U using Tapatalk

It can't hurt to try just a drivers poly. Then do the passenger later if needed.

Like with my poly moubts, I got used to it. My wife not.

I'll say that if my h3 mounts fail I'm slapping the poly mounts in and telling the wife to deal with it.
 

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,712
Reaction score
44,431
Location
Li'l Weezyana
I just got my poly mounts and am eager to install but worried about the vibration.
The drivers side oem mount is the mount I destroy every year or so and have to replace. I'm wondering if I should just install the poly mount on the drivers side and either stay with oem or h2 for the passenger side. Any opinions would be appreciated.

Sent from my SM-G950U using Tapatalk

Well, with one poly you'd feel about half as much more vibes as you would with both being poly. I'd say it's a logical compromise. Again, you'd only really feel any vibes at idle.
 
Top