2008 Yukon Denali, 135k miles, part 2!!
- Thread starter tgui
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I have the 2 main lines in place. A few things will help the install.
- drink and cuss
- tape up the ends of the lines to keep shit out
- make sure the old gasket on the trans isn't still stuck on
- remove passenger side diff bolts and let it hang
- where the one one line meets the trans cooler, I cut out a larger hole for it to fit through. It's got a nasty big 90 degree bend. If not a larger hole you'll need to bend the hard line a bit.
The amount I sawzalled out.
- drink and cuss
- tape up the ends of the lines to keep shit out
- make sure the old gasket on the trans isn't still stuck on
- remove passenger side diff bolts and let it hang
- where the one one line meets the trans cooler, I cut out a larger hole for it to fit through. It's got a nasty big 90 degree bend. If not a larger hole you'll need to bend the hard line a bit.
The amount I sawzalled out.
Not much time tonight.
I was able to get a new exhaust hanger in place. Without one between the ypipe muffler, there is too much sag and flex. Probably not good for the ypipe as well.
Is it ghetto if it works?
Also, I love this damn tool
I was able to get a new exhaust hanger in place. Without one between the ypipe muffler, there is too much sag and flex. Probably not good for the ypipe as well.
Is it ghetto if it works?
Also, I love this damn tool
HiHoeSilver
Away!
Not much time tonight.
I was able to get a new exhaust hanger in place. Without one between the ypipe muffler, there is too much sag and flex. Probably not good for the ypipe as well.
Is it ghetto if it works?
Also, I love this damn tool
That Milwaukee is slick. Where'd you get it?
Amazon, got a gift card. I bet you can find it cheaper somewhere else.
Its soooo worth it. The best part is if the motor isnt strong enough to remove a bolt you can use it like a regular ratchet! Hand loosen, then use the motor.
https://www.amazon.com/gp/product/B006GKFWSS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Its soooo worth it. The best part is if the motor isnt strong enough to remove a bolt you can use it like a regular ratchet! Hand loosen, then use the motor.
https://www.amazon.com/gp/product/B006GKFWSS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
HiHoeSilver
Away!
Nice. I think there's an impact one too.
Similar threads
