Recent content by wafflecakes13

  1. wafflecakes13

    Bent tie rod

    The shocks on there have about 30k miles on them, which granted doesn't mean much. I have done multiple bump tests on all 4 corners with good results. I also detached the shock from the bottom bolt and pushed them in testing for resistance. They were all extremely hard to move by hand so I'm...
  2. wafflecakes13

    Bent tie rod

    I never actually solved my problem DJ. I ended up buying another car and letting the tahoe sit I was so fed up with it and scared to drive it. Spent probably around $2k trying to tighten up steering and handling. About the only thing I can think of left is fukd torsion bars. Getting my sanity...
  3. wafflecakes13

    Horrible "death wobble" after new wheels/tires?

    I have visually inspected them. I did not see or feel any tears in the boots.
  4. wafflecakes13

    Horrible "death wobble" after new wheels/tires?

    M1, I've heard the term before but have no idea what they are. Can you describe and post some pics please?
  5. wafflecakes13

    Torsion Bar Crossmember Bushing Replacement

    Were the symptoms you described the only ones you experienced from the bad bushings?
  6. wafflecakes13

    Bent tie rod

    Yeah man, damn box hasn't been on a month! Won't buy from Detroit axle again.
  7. wafflecakes13

    Bent tie rod

    M1, thanks for sticking with me and all of your insight! I actually was able to arrange a free tow to a dealership on a friend's AAA account haha. The service manager there is an old friend of my wife's from the car scene years ago. It's a nissan dealer but they have a guy that specializes in...
  8. wafflecakes13

    Bent tie rod

    Well, I got half a mile from the house this morning going about 40 mph it started to wander way more than I was comfortable with. No way am I taking it on the freeway in this condition. About to bite the bullet and get a rental and drop it off at a shop. I've tried trial and error for the last...
  9. wafflecakes13

    Bent tie rod

    It was actually installed a little after the problems. You think it could be causing a negative effect?
  10. wafflecakes13

    Bent tie rod

    Yeah steering stabilizer went on a couple weeks ago
  11. wafflecakes13

    Bent tie rod

    Very oddly it seems passenger rear caliper pins were the culprit of the pull...I say oddly since it was pulling to the passenger side. But that was the only wheel that still moved while braking. the slide pins had no grease on them and were slightly rusted. Replaced it just now with a whole new...
  12. wafflecakes13

    Bent tie rod

    Pitman arm and idler arm 35k miles ago. New poly front sway end link bushings, shock extenders for the level. Took front shocks loose from the bottom the other day to test and they were very firm, doing the same with the rears now. Panhard and rear sway seem firm. The pull may be a rear caliper...
  13. wafflecakes13

    Bent tie rod

    Yes i did have a steering box recently replaced. I also replaced tie rods today and it still nose dives hard to the right while braking. It still goes into a swaying motion at highway speeds.
  14. wafflecakes13

    Bent tie rod

    Also I had the new setup on for a few weeks before this started. I already sold my factory setup, but I did swap the front tires which produced no difference.
  15. wafflecakes13

    Bent tie rod

    I'm not really sure how to check the rear,,I know the shocks are decent but as far as control arms etc I'm not sure. Sway bar same thing as Panhard rail?
See more

Forum statistics

Threads
129,114
Posts
1,810,650
Members
92,202
Latest member
Phoenix2k9

Latest posts

Top