Recent content by THE-HOE

  1. THE-HOE

    My Tahoes new set-up on the dyno! VID

    Thanks man, it's the norcal ss custom 6 inch rear drop. With spohn Panhard bar. It never wheel hopps on me, not sure how it will handle slicks, but will find out soon. ---------- Post added at 10:29 AM ---------- Previous post was at 10:23 AM ---------- Thanks, unfortunately I do not have...
  2. THE-HOE

    My Tahoes new set-up on the dyno! VID

    It feels pretty good, really just have to figure out a wastegate issue then should be able to really beat on her.
  3. THE-HOE

    My Tahoes new set-up on the dyno! VID

    QRJjEcj07IU Its a 5.3, tick stage 1 cam with supporting valvetrain mods. Heads are 5.3 with 6.0 valves and ported. Stock truck intake, 60lb injectors. KB racing t-6 manifold with my own custom made crossover and downpipe / full 4 inch exhaust. 4l80e with shift kit, stock rear with true trac...
  4. THE-HOE

    20X9 2014 gmc truck wheels on NBS. Nice

    Thanks ! Hopefully ill have her running in just a month or two.
  5. THE-HOE

    20X9 2014 gmc truck wheels on NBS. Nice

    Thanks again for the sale. When the 22s come out I think my friend is going to get a set from you.
  6. THE-HOE

    Adaptive Cruise Control

    Never had it in a gm. But my 05 bimmer had it and I loved it. Get it!
  7. THE-HOE

    07 silverado Lift kit on a 03 tahoe?

    what was said above is true. if its a 07 classic most of the FRONT parts will work, although i believe the torsion bar brackets are different because of the frame differences between tahoes and silverados. If its not a classic then nothing will work at all.
  8. THE-HOE

    2008 Denali Goes Much Much Faster!

    Sounds really good man. When the final tune is done Youl have to get a speedo video.
  9. THE-HOE

    5.3to6.0 swap really worth it????? or even 6.2

    I think its worth it. I would not just install a stock engine though, that might not be worth the work. I'm sure you would be plenty happy with a lq9 or even a lq4 with a good cam, and ported heads and intake.
  10. THE-HOE

    i never thought id say this

    Ha thanks man, right now I feel like giving the damn thing away. Such a love/hate relationship.
  11. THE-HOE

    How many of us spend wayyyy to much on these things?

    Hahahha
  12. THE-HOE

    i never thought id say this

    " well I officially sold my forged 408 because it was only good for 900hp." I just offically sold my erl built ls2 408 yesterday because I found out it was only good for 900 HP under boost. my goals are higher than that spoiling Cast block 408 with a dragonslayor cank and I beams here I come.
  13. THE-HOE

    Holy torsion bars...

    Used a torch for heat and a air chisel. On my friends tahoe. Took 5 hours of non stop work. Mine took 1. Good luck
  14. THE-HOE

    How many of us spend wayyyy to much on these things?

    Ha tell me about it man. Were all "dumb *****" in some peoples view. I have over 1700 bucks in just my Injectors. You can imagine the rest.
  15. THE-HOE

    Newb with a Escalade needing advice.

    There's a lot of options out there. I know there's someone on here that guarentees lowest prices on all lowering products. So hopefully they chime in. Can't remember the screen name
See more

Forum statistics

Threads
129,174
Posts
1,811,648
Members
92,268
Latest member
willie110hh

Latest posts

Top