Recent content by Tamcphail89
-
T
No air from vents
40 amp blower fuse under the hood was busted. Fixed now. Thanks for your help- Tamcphail89
- Post #20
- Forum: Interior
-
T
No air from vents
In the dash on the driver side? Or under hood?- Tamcphail89
- Post #18
- Forum: Interior
-
T
No air from vents
I pulled the HVAC control out and the plugs look good, nothing burnt. When I turn on the vents, you can hear some light buzzing of something trying to kick on, but nothing goes. And when I switch to floor or defrost you can hear the blend doors switch- Tamcphail89
- Post #16
- Forum: Interior
-
T
No air from vents
It is definitely from the fan, not an open vent. But even at best, it’sa very weak flow from the upper vents or even the defrost- Tamcphail89
- Post #15
- Forum: Interior
-
T
No air from vents
It wasn’t shared because I didn’t think of it at the time I was posting.- Tamcphail89
- Post #13
- Forum: Interior
-
T
No air from vents
I didn’t look too closely. I had to splice the new connector to the factory harness- Tamcphail89
- Post #11
- Forum: Interior
-
T
No air from vents
No difference between auto or manual. If I just turn it on and leave it while I’m driving, sometimes it will come on lightly after 15-20 minutes of driving. But it’s sporadic at the very best- Tamcphail89
- Post #9
- Forum: Interior
-
T
No air from vents
That I do not know actually. Just pull the HVAC control from the dash and check?- Tamcphail89
- Post #7
- Forum: Interior
-
T
No air from vents
I only checked the main HVAC fuse under the hood when I did the reset. I’ll look for the others- Tamcphail89
- Post #5
- Forum: Interior
-
T
No air from vents
Update: I replaced the blower motor and resistor, still no airflow. The blower motor never even comes on. Luckily it’s still not very cold here but it’s coming soon. Any ideas on my next move?- Tamcphail89
- Post #3
- Forum: Interior
-
T
Black Bear EFILive Autocal
Explain like I’m 5 what else is needed with this- Tamcphail89
- Post #2
- Forum: Parts & Accessories For Sale
-
T
Stall converter or cam swap
Did you change to bigger injectors? I just have the factory lq9 ones and I'm sure they'll be maxing out the duty cycle with the cam. Should I go with the 8.1 injectors or bigger?- Tamcphail89
- Post #23
- Forum: Performance
-
T
Stall converter or cam swap
Yea I think that's the direction I'm gonna go. It's pretty affordable through them too. Then tune it to 91 and hopefully be content for awhile haha. It should move pretty well being 2wd 3.73's with that cam and exhaust I imagine- Tamcphail89
- Post #21
- Forum: Performance
-
T
Stall converter or cam swap
Talked to Glenn's performance. He recommended the tsp stage 3 216/220 .550"/.550" 112 LSA- Tamcphail89
- Post #19
- Forum: Performance
-
T
Cold's 05 Yukon Denali Build
Any update on this? I'm looking at the same cam for my 6.0 escalade- Tamcphail89
- Post #19
- Forum: Under Construction
