Yeah cut off the factory leads and soldered and shrinkwrapped them to the plug,honestly a pretty simple quick mod took no more than 10 minutes,filed out the outlet hole a tad bit so it could fit in snug
Got a little bored and decided to swap out the rear Cig outlet with a Quickcharge USB outlet,did the same thing to my center console a while ago since those plug in USB chargers crap out quickly, wanted to do this since I camp in my Burban during music festivals and can monitor my battery while...
if you're on a budget,a simple straight pipe will run you usually about 45 or so bucks depending on the shop,your 6.0 will make some good noise, IMO a denali looks best lowered,and this is coming from a guy with a 3inch lift.
It was actually pretty simple followed this guide step by step and copied the wiring loom and design and made 2 of them, 1 strip sits under the front,and then about 4 feet split off to go to the back seats. Like the guide did I went with chinesium amazon LED strips instead of standard 194...
From my experience the Denali/Esky Center console won't be a direct swap with the wiring harness,it will plug in but the pin locations are completely different
Also did the Esky Shift lever swap about a week ago,and along with smoking the back of my courtesy lights with ye olde Krylon satin black and threw some ice blue LEDs in.
Today I attempted to LED swap my heated seat controls,got the passenger side finished but am having trouble identifying polarity for the driver side pedal controls. Heres what I got so far.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.