Recent content by mooman

  1. mooman

    Trouble removing front differential fill plug

    Air hammer or electric hammer with a point. Dig it into the side closest to the threads and hammer away. I was in your same boat with s stuck drain plug and an Air hammer did the trick. The stock drain plugs are Magnesium and the housing is Aluminium. A very small amount of Anti-seize on the...
  2. mooman

    Went from stoked to kinda bummed

    Because quality over quantity.
  3. mooman

    Loosing oil

    Check oil cooler lines if you have them. Qhere the oil cooler enters the block, for some reason, gm decided to put a metal plate as a gasket. It usually leaks around there. Also, check underneath to see if there are any apparent leaking around. Top side around valve covers and oil cooler lines.
  4. mooman

    2010 Yukon Denali retrofit, highbeam issue

    Ah, I see now. I retro fitted an OEM aftermarket style headlight. You did the spec-D. That maybe why I was kinda confused why the D2S would not fit. In my opinion, LED based SINGLE projector is crap. The hot spot isn't correct. I have never seen a single style LED projector outshine a HID...
  5. mooman

    2010 Yukon Denali retrofit, highbeam issue

    Awww, I was looking realy hard at redoing my lights to the D2S. Thanks for the update!
  6. mooman

    2010 Yukon Denali retrofit, highbeam issue

    By doing the diode between low and fog, it gives it power to the fog so when you activate highbeam, your fogs to autokill. Then by doing this mod: https://www.gmfullsize.com/threads/how-to-nnbs-6-hi-mod-the-proper-way.186969/ It allows you to run High and low together. Now with the diode and...
  7. mooman

    2010 Yukon Denali retrofit, highbeam issue

    Yes. Highbeam is g/w. Low beam is G/blk. When running the diode, "blue" end is to g/blk wire like here:
  8. mooman

    Catch Can disappointment pics inside

    I recently put one on my 6.2 Yukon Denali. I pull a solid 3oz of blowby **** every month it feels like. So far, I have pulled damn near a qt of blowby vapors and I havent even hit an oil change yet. I do beat the hell out of it though.........
  9. mooman

    2010 Yukon Denali retrofit, highbeam issue

    Thanks to your reply, I was able to figure out, kinda, on how to run it semi correct. The way I now have it set it is running that kit from the lowbeam to the highbeam, vs lowbeam to fog. It works now since I need the use of highbeams over the use of fogs right now . I will have to order another...
  10. mooman

    2010 Yukon Denali retrofit, highbeam issue

    I did the retrofit/installation.
  11. mooman

    2010 Yukon Denali retrofit, highbeam issue

    I just finished a retrofit. Morimoto mini h1, bi-xenon. Wired everthing. Perfect. Lows come on and when I go to high-beam, the factory setting is to kill lowbeams and fogs. Got it. I bought this kit which is suppose to over-ride that setting. https://boostautoparts.com/products/6hi I wired...
  12. mooman

    Options for Upgrading 2009 Yukon SLT Headlights

    Check out the Morimoto LED Fogs for our bodystyle. Google and youtube will be your best friend here. Many reviews and for $200-$220 and replaces the whole fog light.
  13. mooman

    Black Bear Chicago Tune

    I just got done running two tanks of E85 through on factory tune. To me, it felt, aka, buttdyno, it felt not as quick. The 6.2 feels like it moves, but felt different from the 91. Going back onto 91, The power was lower in the rpm range and kinda fell on its face after 5krpm. The E85 felt down...
  14. mooman

    Options for Upgrading 2009 Yukon SLT Headlights

    RETROFIT. Ignore the fat asian dude....he is of no concern. Also, like double.......said. LED Signal bulbs with resistors complete it nicely. The factory road lighting is horrid. Even the fogs are better than some, but not great. TRS/MORIMOTO sells actual Plug and play LED fog light for 07-14...
  15. mooman

    Black Bear Chicago Tune

    See circled area.....
Top