Recent content by Hammer02

  1. Hammer02

    Low idle issue

    Cold it runs right But when the truck hits near operating temp, back down to 500.
  2. Hammer02

    Low idle issue

    I take anything thats in the way out right away..Cause If I dont It seems to end up taking longer.
  3. Hammer02

    Low idle issue

    She pulls as hard as ever. kinda why I let it go all winter.
  4. Hammer02

    Low idle issue

    No bad fuel im sure No codes on the injectors Ran fuel system cleaner with premium for 2 full tanks. Dont know about the TC but the trans feels and shifts smooth. All vac lines seem fine Dont know if the intake mani cracked.
  5. Hammer02

    Low idle issue

    Wish I could!
  6. Hammer02

    Low idle issue

    Thanks for the help:)....but I did mention that I had cleaned the throttle body already.
  7. Hammer02

    Low idle issue

    2002 yukon denali 6.0 Low idle So low the ac goes warm at lights or drive thru. Engine has never stalled out tho. Sits around 500 Cleaned the throttle body today. New plugs and wires today as well. Went to clean the IAC but I have this body.... First off Idk if this is even the one that is...
  8. Hammer02

    02 Yukon Denali Ac issue.

    Sorry for the blurry pic...I quickly found it on google.
  9. Hammer02

    02 yukon Denali Cluster issue

    UPDATE: I just plugged in my code reader to clear the cel for an unrelated issue and when I plugged it in the cluster and trip computer came on! But wont stay on unless I leave the reader plugged in.Very confused now.
  10. Hammer02

    02 yukon Denali Cluster issue

    It started with my cluster along with my trip computer cutting off and back on as I hit bumps. Then it got worse cutting off more often on smaller bumps. Then yesterday it and the trip/info center above the CD changer both went off and stayed off. The cel and back illumination still work. The...
  11. Hammer02

    ECM-B fuse issue

    So I'm doing like 75 on the hwy and my engine cuts out! Long story short,I get it home and after some looking around I find a blown 20amp fuse labeled Ecm-b. Changes out the fuse...fires right up. Cut to about 15 mins ago it happens again! I change the fuse..fires right up. But this time I get...
  12. Hammer02

    02 Yukon Denali Ac issue.

    So I've been so busy with the AC being fixed and a new problem that I forgot to give an update. So...it was a leak. A leak that the last place I went to who "Tested for leaks" and then "filled" the coolant..said wasn't there. New place caught the leak and repaired it and filled me up with the...
  13. Hammer02

    02 Yukon Denali Ac issue.

    So I watched the heater treater video for the yukon and Im convinced that blend door isnt broke.With the acuator off I can turn the blend door and get really hot air to come out and back to get cool(not cold)air.So it seems the door is intact.
  14. Hammer02

    02 Yukon Denali Ac issue.

    What blend door should I bee looking at? The one I checked it the lower main. But from what I understand there is more. Also it's not dual zone...if that matters.
  15. Hammer02

    02 Yukon Denali Ac issue.

    So little update on the blend door actuator. I got a brand new one and plugged it in before installing it and when I turned the temp knob...it did nothing. Side note I turned the blend door by hand to see if the air gets cooler...it didnt.
See more

Forum statistics

Threads
129,127
Posts
1,810,873
Members
92,214
Latest member
George ramos

Latest posts

Top