Recent content by Esko07

  1. E

    Stabilitrak and traction control off & P0010

    Hello again all! I recently had a broken valve on cylinder 3 of my 2007 Escalade and just got it back on the road. Since then, it fires right up and drives pretty good except for a few concerns. 1. Stabilitrak and traction control off 100% of the time on startup. I have noticed that if I...
  2. E

    Broken intake valve at 113,000 miles

    Whoops, I mean code P0010 for the camshaft sensor actuator wiring open bank 1.
  3. E

    Broken intake valve at 113,000 miles

    Cleared the code, drove around for about 15 miles but it returned on next startup. Disconnected the actuator from the wiring harness and cleaned it up but didn’t see anything broken. The wiring is stiff to the touch as from the heat of the engine. Will need multimeter to test continuity next...
  4. E

    Broken intake valve at 113,000 miles

    Okay thanks! I’ll make sure to check wiring. Hopefully it’s a simple fix.
  5. E

    Broken intake valve at 113,000 miles

    Will check all of these first thing tmw and report back. Thank you!
  6. E

    Broken intake valve at 113,000 miles

    So just got it all back together and it fired right back up! But there are some issues. Now it is throwing code P0010 for the camshaft position sensor even though I just replaced it and the magnetic actuator. Do I need to have it tuned now? I thought that was only for the crankshaft position...
  7. E

    Broken intake valve at 113,000 miles

    Just watched this! Oh wow, not good news at all. Praying mine fires right back up.
  8. E

    Broken intake valve at 113,000 miles

    I thought of this as well but sometimes it takes time to kick a code for a specific cylinder. I shut her down pretty quick after the pop and reduced power. After dissembling and compression testing all cylinders, cylinder 3 was definite the culprit. Not saying others didn’t contribute but this...
  9. E

    Broken intake valve at 113,000 miles

    Yeah could have been a weak spring for sure. That’s my thought as well as it happened when I was accelerating to get over into the carpool lane. Timing all checks out fine. Retainer was fine and still attached to spring. Just got the head back from machine shop and re-assembling as we speak...
  10. E

    Broken intake valve at 113,000 miles

    I know, This seems extremely rare. I can see where the valve hit the piston but looks like it was bouncing on top of it. Cleaned the top of piston and no cracks and cylinder walls look legit. Think I got lucky somehow. Just got the head back from machine shop and putting it all together as we...
  11. E

    Broken intake valve at 113,000 miles

    Hey all! New member here and I really appreciate all of the threads on various issues. Has helped me tremendously on previous repairs. I have a 2007 Escalade AWD with the 6.2L. Recently while getting on it and accelerating on the freeway the engine straight up popped and had instant loss of...
See more

Forum statistics

Threads
129,125
Posts
1,810,845
Members
92,211
Latest member
patrickleeleep

Latest posts

Top