Recent content by debo4x4

  1. D

    Small wheels big tires!!

    285/50/22 Toyo AT3 completely stock 2021 Denali. I did have to pull back the front inner wheel well liner just a bit and zip tie it. It barely touched the liner at full lock and flex so this was really not needed but I did it as a precaution. You can't even tell unless you crawl underneath and...
  2. D

    21+ Exhaust

    I installed a magnaflow 12909 today on my denali and it's a little louder than stock at idle and you can definitely hear it with some throttle. I removed both adaptive valves and now wishing I didn't as there's some pretty good drone at low rpm. Not sure what I'll do now. I saved the stock setup...
  3. D

    AT4 XL - Largest Tires?

    I did 285/50/22 Toyo AT3's on my Denali. No trimming needed, but I did remove a bracket behind the fender liner in order to pull it back just a bit and zip tied it off. That gave enough room that there's no chance of rubbing on the inner liner. You wouldn't even notice it unless you crawl...
  4. D

    Remove adaptive valves?

    Installing a magnaflow 12909 in my 2021 Denali and wanted the consensus on removing both the adaptive valves? Not looking for much more sound than stock which is why I went with the magnaflow but don't want drone either. I've heard remove them both and I've heard just remove the egress valve...
  5. D

    305/45/22 will fit nicely!

    yes but hardly noticeable unless you really listen for it
  6. D

    305/45/22 will fit nicely!

    285/50/22 Had very slight rub on inner rear fender well at normal ride height so I did have to zip tie it back just a bit. There's a bracket that the fender liner attaches to that I was able to remove and that gave me the room to pull the liner back and tie it off. You can't even tell it's...
  7. D

    305/45/22 will fit nicely!

    That's good to hear. I was torn between the 305/45 and the 285/50 because of the weight difference so hopefully I don't regret it. I don't plan to ever level either but don't want any rubbing so I'm anxious to see how it turns out.
  8. D

    305/45/22 will fit nicely!

    Looks great! I'm having 285/50/22 Toyo AT3 put on my Denali this weekend. Was concerned about the width as there's not much room between the top of the A-arm and the inside of the tire, but if you don't have issues then I shouldn't as mine are a little more narrow. If the 33.4 height is too...
  9. D

    2016 Tahoe Z71 running boards

    no never did. called a few dealers and they show the product code is in the their system but it's not available for purchase yet. strange since I'm sure there's a need to replace these on wrecked/damaged vehicles so how would they get them in that instance???
  10. D

    Show off your 2015+ leveled Tahoes and Yukons!

    here's my 2015 Tahoe Z71, 2in front/1 in rear level with BFG AT's
  11. D

    Putco Nite-Lux LED Foglight Install

    I went with a cheaper version from Amazon(I know you get what you pay for but for $40 it was worth a try) and so far so good after about a month of use. Very similar design to the putco but about 1/3 the price...
  12. D

    LEDSs headlights package

    My 15 Tahoe uses the PSX26 for the fog light so you might check that out. I did LED's in HI/LOW/FOG and used the fanless design so all components fit in the housing and I was able to close the dust covers.
  13. D

    MagnaFlow Performance Exhaust for the 5.3L?

    I ordered a Magnaflow 12259 muffler off Amazon yesterday for $90 delivered. Should be here tomorrow and will try to find a muffler shop to weld it in. Plan on removing the flapper but leaving resonator. 15 Tahoe Z71...5.3
  14. D

    2016 Tahoe Z71 running boards

    Hi Fellas, Does anyone know the part # for these running boards? Mine came with the 6" chrome ones and I like the matching grey color with the wheels. I've looked everywhere online and can't seem to find anything on this model. Also, any idea if the running boards from a 2014 Tahoe...

Forum statistics

Threads
129,174
Posts
1,811,647
Members
92,268
Latest member
willie110hh
Top