Ceejkay
Latest activity Postings About
-
-
Ceejkay replied to the thread Misfire on DOD cylinders.@donjetman since it's all my dod cylinders I'm not 100% sure the full soak is needed. I will be curious how it looks when I pull it apart. -
You might want to do a piston/combustion chamber soak. The bad pcv in the driver side valve cover can stick the piston rings in their...
-
Ceejkay replied to the thread Misfire on DOD cylinders.@Fless i think it's an illusion. It's pretty caked.
-
Ceejkay replied to the thread Misfire on DOD cylinders.So did some more troubleshooting I guess you would say. Ran a compression test, probably should have started there. All the afm...
-
-
Ceejkay replied to the thread Misfire on DOD cylinders.I figured that out shortly after posting. So right now I only get 2mins to look at stuff before it zeros out. @swathdiver so next steps...
-
if the trims lock to zero when it starts missing badly. it might be dropping out of closed loop.
-
Ceejkay replied to the thread Misfire on DOD cylinders.Nope she's not good at all. Misfires are still hitting and feel even worse. It's doing it even in neutral now. When it starts missing...
-
Ceejkay replied to the thread Misfire on DOD cylinders.@swathdiver went and put some chevron 93 in it, 27 gallons to be exact. So good gas. Only about a 5 mile run. Checked the alcohol...
-
-
Well, make sure she has some Top Tier 93 from somewhere or even E85 and check the alcohol content in Fuel Trims with the Tech-2 to make...
-
Ceejkay replied to the thread Misfire on DOD cylinders.@swathdiver I did check the gaps and wires. And I couldn't tell you if they are fakes or not. I would be lying if I said I knew what I...
-
Ceejkay replied to the thread Misfire on DOD cylinders.@donjetman ill look into that, it's a new to me vehicle so who knows what's all been done. They did do a tb cleaning before I got it and...
-
Back with a new to me truck. Just got a 2010 Escalade with the 6.2 awd. 180k miles. Been about 8 years since ive owned a gm and little...
-
-
-
Loading…
-
Loading…
