Recent content by CAResearch

  1. C

    Any interest in 4wd front coilovers to replace tbars?

    Im interested ,shoot me a message and total
  2. C

    2005 Escalade Suspension

    What exact model Bilstein 4600's are recommended for the front and back, when using the MOOG 81070 springs? Im trying to be as bear to stock height and smooth ride as possible. I have the arnott passive set installed for a few years now, and it's time to change them out due to mileage and lack...
  3. C

    2004 yukon denial xl adjustable pedal to brake position "alignment"

    Thanks!! that is what I did indeed have to do. Put the old one back in, adjust the controls all the way down to the firewall. Then put the new accelerator pedal in. All works great now.
  4. C

    2004 yukon denial xl adjustable pedal to brake position "alignment"

    I changed out my adjustable pedal today due to a throttle position code. Well my code is gone but I made a bid mistake it seems The installation instructions I had, stated to put adjustable pedal to the "highest" position nearest the seat before installation (using the door pedal controls)...
  5. C

    2004 Denali Suspension Issue

    Thanks very much, I'll look at the cv joints
  6. C

    2004 Denali Suspension Issue

    Hey everyone I need some help. My ride is terrible in my 2004 Denali XL. Over the last few years I have replaced my air air shocks with *stock rears and a Arnott compressor *Arnott air shock replacements same compressor *bilstein shocks (yellow hd) and springs (99020) *and most recently...
  7. C

    Any interest in 4wd front coilovers to replace tbars?

    ygm
  8. C

    Ongoing Motor Sound in rear of truck, inside cabin-help identify

    I will try that-Thanks, but why would the rear blower turn on WITHOUT the rear air turned on?
  9. C

    Ongoing Motor Sound in rear of truck, inside cabin-help identify

    I have a 2004 denali xl, that as soon as I turn the car on there is a motor running in the rear of the car on the inside. Its runs non-stop while the car is moving. Once the engine is turned off, it winds down and turns off. I thought it was the compressor for the shocks, but the air system...
  10. C

    04 Denali XL AWD--07 front rotor conversion-ABS issue

    Yep that is what I did today, and it worked.
  11. C

    04 Denali XL AWD--07 front rotor conversion-ABS issue

    Yeaaah, I was able to bleed the system properly and the added braking power really is awesome. Thanks for all the help guys!!!
  12. C

    04 Denali XL AWD--07 front rotor conversion-ABS issue

    :chair::chair::chair::chair: just saw that I had the darn things upside down:chair::chair::chair: so thanks for the help the bleeder is now in the correct orienation, would that be the reason why I have no pedal pressure? I can't bleed it till my brother comes home arrrgh
  13. C

    04 Denali XL AWD--07 front rotor conversion-ABS issue

    Okay I pulled everything apart again, and tested fitments. Please see the pictures I added to see if you see anything awry. this is the FRONT DRIVER SIDE 1) the metal retaining clips were rubbing against the rotor (hence the silver circle pattern around the top circumference of the rotor...
  14. C

    04 Denali XL AWD--07 front rotor conversion-ABS issue

    Hey all I upgraded my front rotors/calipers/brackets and pads with 07+ size parts (rotors and pads)--saw a thread where this was done for increased stopping power, yet I seem to be having some weird ABS issues. I have tried numerous times to bleed the system (as I had to remove the brake...
  15. C

    Arnott Rear shock leak test? Ride height low

    The car sits even , so the rear is the same height as the front. But yeah I'll post a pic or two in a sec, I'm away from the truck at work.
See more

Forum statistics

Threads
137,686
Posts
1,989,613
Members
102,687
Latest member
JohanZ

Latest posts

Back
Top