Yeah, looks great!
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Looks good
Sir_Hiro
Automotive Mad Scientist
- Joined
- Jan 28, 2025
- Posts
- 287
- Reaction score
- 710
Thanks guys. It sucks the PO never took care of the exterior
the most mine usually get is some dawn dish soap & hot water, probably could use a good polish as well though
Sir_Hiro
Automotive Mad Scientist
- Joined
- Jan 28, 2025
- Posts
- 287
- Reaction score
- 710
I used turtlewax chrome polish and a cone polish wheel and 3 inch buffer on my drill.
I tried just straight polishing compound but it had a werid reaction on the chrome..but the chrome polish took it right off
- Joined
- May 9, 2018
- Posts
- 7,068
- Reaction score
- 13,809
A good 1st wash ...use a mechanics hand soap with the grit....if it's has embedded dirt.
Installed! Just pulled the airbag fuses and set it on top of the steering column, no battery disconnect
RooTBeeRthe1st
Full Access Member
- Joined
- Jul 11, 2018
- Posts
- 1,226
- Reaction score
- 2,854
Yeah, my old Mickey Thompson MT's were 285/70r17 and were darn close to a 33x11.50...the tire has been self clearancing what little inner fender i left covering the windshield washer bottle.
I like cheese
Sir_Hiro
Automotive Mad Scientist
- Joined
- Jan 28, 2025
- Posts
- 287
- Reaction score
- 710
After the first good wash im gonna compound and polish the entire truck. Then throw a coat of wax on. The entire truck js covered in brake dust rust
RooTBeeRthe1st
Full Access Member
- Joined
- Jul 11, 2018
- Posts
- 1,226
- Reaction score
- 2,854
Holy smokes summit racing was fast this time... And they used ontrac which I've never had luck with.
24 hours after I ordered it was on my door step, from Nevada to SoCal.
24 hours after I ordered it was on my door step, from Nevada to SoCal.
good luck!
NardDog
Full Access Member
- Joined
- Mar 26, 2017
- Posts
- 131
- Reaction score
- 125
I tried to remove my D pillars for some cleaning and paint but they were falling apart and cracked. Decided to find some Cadillac D pillars on Ebay, cant wait to paint and install these!
RooTBeeRthe1st
Full Access Member
- Joined
- Jul 11, 2018
- Posts
- 1,226
- Reaction score
- 2,854
Thanks, this is the updated one with the straight upper mounts rather than the 90°, and the end tanks without the ripples in the middle.
Hopefully this updated one doesn't have issues.
But I did get three and a half years out of the first one without issue.
The only thing I'm curious about is if my trimmed fan shroud is going to have a huge gap now or not.
And I'm eventually going to put my dang Hood louvers in which is going to keep my temps down overall anyway.
Side by side the shade difference is very noticeable. But the fitment looks spot on.
Time to buy the right side so they match.
Side by side the shade difference is very noticeable. But the fitment looks spot on.
Time to buy the right side so they match.
Ha! That's just lighting.
that was from the light reflection, both sides match the sameSide by side the shade difference is very noticeable. But the fitment looks spot on.
Time to buy the right side so they match.
same reason I can never trust online photos of interior parts or painted parts, depending on the light the shades can look about right but can be way off
They actually look really nice.
I may have to get a set for my Yukon, the left side has a pretty big scratch from the PO.
I like the brushed look more than the flat look of the originals.
Last edited:
RooTBeeRthe1st
Full Access Member
- Joined
- Jul 11, 2018
- Posts
- 1,226
- Reaction score
- 2,854
All of the matte coating has come off mine, they're just gloss black now.
Last edited:
I was thinking about having these old ones hydro dipped with something cool
