What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bfourman

Full Access Member
Joined
Aug 23, 2015
Posts
139
Reaction score
256
Location
Indiana
Per the owners manual press the lock button and then hold remote start until park lights flash.

Remote start will not work if CEL/SES is on or hood is open. Mine occasionally pops the SES for 0430 and if the wife is driving and doesn't tell me to clear it remote start won't work.
 

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,712
Reaction score
44,433
Location
Li'l Weezyana
+1 for pressing the lock button at least once then holding the start button until the lights flash. Even if it's already locked, you still have to press the lock button. If you press lock and wait too long before pressing start, like 10 seconds or so, you'll have to press lock again.

And, yeah, no remote start if SES light is on.
 

R3cord303

Posse In Effect
Joined
Feb 28, 2019
Posts
1,166
Reaction score
1,421
Location
Oregon Valley
Thanks guys. Remote start works great! I guess there isn’t anything different about turning off the CEL for the cats and downstream o2s and ‘tuning them out’ because if I plug a scanner in I can see like 5 different codes and not have a CEL.

that or the remote start just looks for the CEL and if it’s on or off, and not actually checks if there’s codes set
 

wendal

Full Access Member
Joined
Jan 31, 2012
Posts
322
Reaction score
567
Location
Dallas
I literally love this forum
I'd be concerned about why the bolts wouldn't tighten up. Are they too long? For the stripped hole, it should be an easy fix with the installation of a Heli-Coil: https://www.stanleyengineeredfastening.com/brands/optia/heli-coil

THIS!!!!! I literally love this forum! Just caught up on the last 15 or so pages. Tools, tips and feedback galore. If it weren't for you guys, I would not have the courage, knowledge nor skill to do some of the things I have done to my truck. Here, for example, is @iamdub, literally days later, coming up with something I had absolutely no idea existed. I appreciate that you guys have genuine concern for the group and the people in it... enough to be thinking about my problem, a guy you don't know personally, DAYS LATER. I was really, REALLY worried about the stripped threads in that hole. This has given me peace that I'm not going to have to have the engine removed to re tap that hole, or some other ungodly expensive procedure like a new engine block to get my truck back to 100%. To @iamdub , @kbuskill , @Fosscore , @Rocket Man , @Doubeleive , @89Suburban ,@lowh07 ,@gooffeyguy , and all the others - I want to send a personal THANK YOU to each of you. If I missed you, believe me, I appreciate you too!
 

BG1988

Full Access Member
Joined
Nov 14, 2018
Posts
2,925
Reaction score
1,329
You're lucky, even my '06 Pontiac would not remote start with codes present.
the weirdness even goes further I have been able to accelerate in V4 mode.
basically it will stay in V4 mode from 0 mph I can accelerate to normal speed...

yes the tac was revving more like a 4 cylinder then a 8


and M4 permanently keeps v8 mode on and AFM is disabled..
 

R3cord303

Posse In Effect
Joined
Feb 28, 2019
Posts
1,166
Reaction score
1,421
Location
Oregon Valley
the weirdness even goes further I have been able to accelerate in V4 mode.
basically it will stay in V4 mode from 0 mph I can accelerate to normal speed...

yes the tac was revving more like a 4 cylinder then a 8


and M4 permanently keeps v8 mode on and AFM is disabled..
your 2 mode hybrid prob has a way easier time staying in v4 mode which is kinda cool
 

BG1988

Full Access Member
Joined
Nov 14, 2018
Posts
2,925
Reaction score
1,329
your 2 mode hybrid prob has a way easier time staying in v4 mode which is kinda cool

normally you can't run v4 ¯\_(ツ)_/¯ tell about 25-35mph or so or less then 30% engine load or 35% Enigne load once engaged)

but it did say v4 on the screen and had the AFM tone, no CEL or pending CEL though


i think the VLOM are damaged as well

since there is a faint rod knock and clacking ( audible on a cold start)
 
Last edited:

kbuskill

***CAUTION*** I do my own stunts!
Joined
Mar 11, 2017
Posts
5,213
Reaction score
8,068
Location
NE. FL.
I literally love this forum


THIS!!!!! I literally love this forum! Just caught up on the last 15 or so pages. Tools, tips and feedback galore. If it weren't for you guys, I would not have the courage, knowledge nor skill to do some of the things I have done to my truck. Here, for example, is @iamdub, literally days later, coming up with something I had absolutely no idea existed. I appreciate that you guys have genuine concern for the group and the people in it... enough to be thinking about my problem, a guy you don't know personally, DAYS LATER. I was really, REALLY worried about the stripped threads in that hole. This has given me peace that I'm not going to have to have the engine removed to re tap that hole, or some other ungodly expensive procedure like a new engine block to get my truck back to 100%. To @iamdub , @kbuskill , @Fosscore , @Rocket Man , @Doubeleive , @89Suburban ,@lowh07 ,@gooffeyguy , and all the others - I want to send a personal THANK YOU to each of you. If I missed you, believe me, I appreciate you too!

I am curious to hear your thoughts on the headers once you have it all buttoned up.

I forget... do you have a custom tune now or do you plan to get one??.
 

HiHoeSilver

Away!
Joined
Feb 28, 2017
Posts
10,919
Reaction score
14,571
Location
Chicago
Finished lowering down my hybro....hopefully this weekend get over to the exhaust shop...going with doug Thorley shorts
and converting to a dual cat back....score one for the hybro's!!

View attachment 233923

Plan on putting some tires on it at some point so you dont wreck those nice wheels? :bleh:
 

Forum statistics

Threads
128,786
Posts
1,805,392
Members
91,765
Latest member
AT4Hunter
Top