wiring seats

[makindust2]

Hi Ia m trying to wire in 2004 silverado dual power seats into my 1997 single drivers power seat truck.
How do i get them to wire in?
Any Help will be very much appreciated.
Thanks in Advance Skip

 

[SunlitComet]

you will need 30 cb'd feeds from the hot battery bus. you should have connectors under the seats already. black is ground and orange is the battery feed.

 

[makindust2]

I do not really know what you are saying about the 30 cb'd feeds from the hot battery bus
could you please explain further ?
Thanks for the help

 

[SunlitComet]

power feed that feeds off an always hot connection. protected by a 30 amp circuit breaker which should already be installed on the interior fuse block. it feeds the orange wires underneath seats which sticks out from underneath the carpet.

 

[makindust2]

Ok Thanks Again Sunlit