Remove Center Console Back

[kysrsze]

Can anyone provide simple instructions on how to remove the rear panel of the center console in a non-PPV 2011 Tahoe? I got the 5 screws in the fold-out cup holder undone and the bottom of the back panel unclips from the sides and I can pull it out, but I cannot figure out how to get the top to separate. I pulled on it a little, pried a little, and nothing. I have the rear AC and radio controls. I can't see any other screws. What am I missing?

I am hiding wires from the new headrest TVs in the console but can't do a real good job without removing the panel.


Thanks.

 

[joshcarl]

did you try unscrewing the arm rest lid and looking under that piece?

 

[VA929RR]

YouTube it.. That's how I figured out how to remove the one in mine.

 

[Mugs]

I'm having the same issue in a 2010 Yukon Denali. I've searched youtube and have not found an instructional video. I'd like to remove the rear panel to check the aux port piece or replace it. The audio works when I plug in a roku or external DVD but the video does not. I've used the controller to switch to the aux input on the rear screen. I found these diagrams. They look correct but not sure they are accurate for my vehicle. If anyone has a link to a youtube video or could verify these diagrams are accurate I would appreciate it. Thanks in advance.

 

[Meccanoble]

These diagrams were very helpful. I'll be tackling a similar job soon. Looks like the immediate face pops off after removing/popping off 3 clips, then 4 screws holding the entire back.