How much drop can you go before you need c notch?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Luckychucky

TYF Newbie
Joined
Mar 19, 2016
Posts
5
Reaction score
0
i just bought a 98 2wd 2d and am wanting to lower it. My plan is to run 20" or 22" wheels with a small drop? Would a 2/4 drop require a c notch?

My goal In the end is to just have a mild drop with aforementioned size wheels. Trying not to sacrifice ride quality too bad and eliminate too much wheel/fender gap. Thanks in advance
 

Zo6_shawn

TYF Newbie
Joined
Apr 25, 2016
Posts
11
Reaction score
1
Location
MIAMI , FL
From the research I've done , you should be good with a 2/4 drop with out a c-notch.. Anything more than 5.5 in the rear needs the notch , even the 5.5inch drop might bottom out on the axle with a decent bump
 

achevyman1996

TYF Newbie
Joined
Aug 17, 2015
Posts
3
Reaction score
6
Location
Virginia
c44466048f9c12ff807b728dea82110f.jpg
The only thing I did was remove the bumpstops. Not just the rubber but the entire bracket. I had dropped leafs and was running 20sat the time
 

Forum statistics

Threads
129,121
Posts
1,810,780
Members
92,207
Latest member
2DoeProjectHoe
Top