Escalade keyfob on a Yukon?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

saadmoughal

TYF Newbie
Joined
Oct 21, 2011
Posts
2
Reaction score
0
Last edited by a moderator:

bauer4567

Full Access Member
Joined
Jul 5, 2010
Posts
277
Reaction score
3
Location
Allentown, PA
Yes. Should work fine. I programmed a couple denali fobs to my dad's escalade, because the cadillac fobs are garbage and break all the time.
 

mattah

Full Access Member
Joined
Dec 4, 2011
Posts
383
Reaction score
1
Location
Austin, TX/Temple, Tx
So since we sold the esky, I didnt give the dealer all the keys so I used one of the spares we had on my yukon today and it does work.

Kinda cool
 

blkonblk

Supporting Member
Joined
Dec 22, 2011
Posts
949
Reaction score
35
Location
NYC
bumpin an oldie here -

so i just did this to my hoe,,i got a 6 button esci fob key (the new models) and programmed it to my 2008 hoe in 30 sec. very easy to do and love the eski key fob. i just have to remove the eski emblem in the back of it. just thought i let you guys know
 

NathanJax

Vacation Nathan
Staff member
Administrator
Supporting Member
Joined
May 9, 2009
Posts
49,124
Reaction score
943,577,131
Location
Jax, Fl
bumpin an oldie here -

so i just did this to my hoe,,i got a 6 button esci fob key (the new models) and programmed it to my 2008 hoe in 30 sec. very easy to do and love the eski key fob. i just have to remove the eski emblem in the back of it. just thought i let you guys know

pic of remote? Is this the one you did?

$(KGrHqRHJEkFGJV03H82BRn,rH5E5w~~60_35.jpg


Also, do you have programming instructions?
 

Stresst

Full Access Member
Joined
Oct 6, 2010
Posts
1,172
Reaction score
47
pic of remote? Is this the one you did?

$(KGrHqRHJEkFGJV03H82BRn,rH5E5w~~60_35.jpg


Also, do you have programming instructions?

1. Insert Key and turn to ON position so you can access Driver Information Center

2. Press the vehicle information button until
PRESS TO RELEARN REMOTE KEY displays

3. Press the set/reset button until
REMOTE KEY LEARNING ACTIVE displays

4. Press and hold the lock and unlock buttons on the first keyless remote at the same
time for approximatley 15 seconds. A chime will sound indicating that the remote is
programmed.

5. To program additional remotes at this time repeat step 4.
This vehicle can have a maximum of eight remotes programmed.
6. To exit programming mode turn key off and remove key.
Test remote(s).
 

LTN09

Member
Joined
Jan 8, 2013
Posts
55
Reaction score
1
These instructions will only work for the 07 and 08's. I think the 09's and up, you have to go to the dealer or a locksmith to reprogram, unless you have a way to access the truck's cpu. Thats what I had to do.
 

blkonblk

Supporting Member
Joined
Dec 22, 2011
Posts
949
Reaction score
35
Location
NYC
pic of remote? Is this the one you did?

$(KGrHqRHJEkFGJV03H82BRn,rH5E5w~~60_35.jpg


Also, do you have programming instructions?

hey Nathan -

yes that is the remote, i got it of ebay for $40 i think.

very simple programming Stresst has it on point,,(you have to program all the remotes that you have at same time)

1. Insert Key and turn to ON position so you can access Driver Information Center

2. Press the vehicle information button until
PRESS TO RELEARN REMOTE KEY displays

3. Press the set/reset button until
REMOTE KEY LEARNING ACTIVE displays

4. Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximatley 15 seconds. A chime will sound indicating that the remote is programmed. (takes about 4 seconds)

5. To program additional remotes at this time repeat step 4.
This vehicle can have a maximum of eight remotes programmed.
6. To exit programming mode turn key off and remove key.
Test remote(s).
 

Forum statistics

Threads
128,800
Posts
1,805,611
Members
91,783
Latest member
Banjomatic
Top