Tahoe03mm
Full Access Member
Pac1218 were like $120 shipped from sdpc and they are good up to .600 lift. I've heard bad things and good things about 918's, couldn't find much bad about PAC
Cam selection
- Thread starter viximaging
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
HMFDZ28
Full Access Member
yeah the PACs are good springs, esp for the price. The 918s had a bad batch awhile ago causing some issues not to mention guys go way to big of a cam for them. I have always run crane's in the past and have a set of duals goin in my Z28 once it gets warmer here for my heads/cam swap.
I agree with what everyone is saying, that cam is WAY too big, you would hate it and you would definitely need a large stall. I am running Comp Cam 206/212 115LSA on my Tahoe, and was running it without the blower. It is a great DD cam with power across the bands. I went with the 115 as I knew a blower would be going on shortly thereafter.
Similar threads
