Any center consoles with a 4x4 floor shifter?

[Fuaadow]

Hey guys im looking for ideas of a center console for my 96 yukon with a 4x4 floor shifter.

Thx in advance

 

[95BlackTahoe]

I decided to go with the main section of a NBS console in my Tahoe. I had a few esky consoles, but I just couldn't destroy one to "make" it fit when there are so many guys looking for one that don't have that issue... There has to be a way to make it work, but I am just not really sure how to go about it.

Actually, I am pleased with the NBS main half, it does all I need.

Shawn

 

[Gzes]

I have the oem one for my 94. Its different than the 95+ does what i need

 

[Fuaadow]

I decided to go with the main section of a NBS console in my Tahoe. I had a few esky consoles, but I just couldn't destroy one to "make" it fit when there are so many guys looking for one that don't have that issue... There has to be a way to make it work, but I am just not really sure how to go about it.

Actually, I am pleased with the NBS main half, it does all I need.

Shawn

Could u please show me some pics cuz didnt quite get what u meant... Thx

 

[Monstar_est87]

http://www.tahoeyukonforum.com/forum/showthread.php?t=16869

Hes talking about the main storage and cupholder section...

 

[95BlackTahoe]

Here is the console I installed...Just the main section only...






I guess the only thing that is really bugging me is that I have to find a plate to cover the front hole...



But this console may not remain in long, as I think I have figured out a way to use the full length Escalade/Denali console with the floor shift.

I mess around in the yards too much.

Shawn

 

[kaoticlife]

just cut a piece of masonite and cover it with gray leather like fabric and use mounting tabs or screws?

 

[AZ Tahoe]

Would be sweet if you could get the rear ac to work

 

[_Dylan_]

Use a NBS console and make the middle piece from fiberglass?

 

[edward61]

Here is the console I installed...Just the main section only...






I guess the only thing that is really bugging me is that I have to find a plate to cover the front hole...



But this console may not remain in long, as I think I have figured out a way to use the full length Escalade/Denali console with the floor shift.

I mess around in the yards too much.

Shawn

Looks good any updates did you get the escalade console to work.