Adjustable Pedals-manual jump?

[Robt342003]

Recently the adjustable pedal feature on my 2016 Yukon Denali has stopped working. From the research I've done it could be a bad switch, switch, motor or relay. I hear the relay kicking on when the switch is activated. The fuse is good too. If I remove the plug that goes into the motor can I manually jump the motor? I rarely use the pedals and would really just like to move them into the most down position and leave it be. Which pin is hot to activate the motor?

 

[Joseph Garcia]

Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

I cannot personally assist you with your issue, but other members of this Forum much more knowledgeable than me in this area will chime in.

 

[wamba the fool]

I have the same issue on two of my trucks. Is there a possible manual adjustment?