305-40-22 Tires

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BADRIDES

Full Access Member
Joined
Dec 18, 2015
Posts
1,726
Reaction score
1,131
Anyone have this tire size on a dropped 2000-2006 Tahoe. I have a brand new set of Texas Edition wheels and cant decide between the 305-40-22 and 285-45-22 tire size. I'm dropped 2/3 currently with 275-55-20 tires.
 

04Huck

"I'd rather be lucky than good"
Joined
Oct 27, 2016
Posts
522
Reaction score
742
Location
Buford, Ga
I have a 2/3 on my 04 Yukon and 285/45/22 Toyos. They're too big, they rub on the front passenger side, on the rear of the inner wheel well. And slight scrub in the rear. Its driveable, and you can live with it but definitely couldn't go any lower on these. I would guess the 305/40s will be too big too.
3c6efe0a3c9f1d579888616a8e18c0ef.jpg

Sent from my VS990 using Tapatalk
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
30,973
Reaction score
45,102
Location
Central Jersey
Here's mine. Fronts are 305 40 22's and rears are 305 45 22's. I'm dropped around 3/4 also.

IMAG2051.jpg

IMAG2057.jpg

IMAG2054.jpg
 
OP
OP
BADRIDES

BADRIDES

Full Access Member
Joined
Dec 18, 2015
Posts
1,726
Reaction score
1,131
I have a 2/3 on my 04 Yukon and 285/45/22 Toyos. They're too big, they rub on the front passenger side, on the rear of the inner wheel well. And slight scrub in the rear. Its driveable, and you can live with it but definitely couldn't go any lower on these. I would guess the 305/40s will be too big too.
3c6efe0a3c9f1d579888616a8e18c0ef.jpg
I dont understand how and where you rub on the rear. I've never heard of anyone rubbing on the rear.
 

04Huck

"I'd rather be lucky than good"
Joined
Oct 27, 2016
Posts
522
Reaction score
742
Location
Buford, Ga
I dont understand how and where you rub on the rear. I've never heard of anyone rubbing on the rear.
It's only very slight. Where the inner fender has those bump outs, they just graze so slightly there. Maybe it's the offset of these wheels, idk.

Here's a shot of the right front where it rubs on the inner fender. It's about halfway up
a8590e725fc17b86caa61a066475c21d.jpg

And the rear. I should also note, I haven't done an adjustable panhard bar yet either so it's mainly on the left rear where it pulled the wheels over
056568ba9b24a91e8c5c236e75f46a4d.jpg

Sent from my VS990 using Tapatalk
 
OP
OP
BADRIDES

BADRIDES

Full Access Member
Joined
Dec 18, 2015
Posts
1,726
Reaction score
1,131
It's only very slight. Where the inner fender has those bump outs, they just graze so slightly there. Maybe it's the offset of these wheels, idk
Shoot a pic and show me where you are talking about.
 

Forum statistics

Threads
129,103
Posts
1,810,354
Members
92,177
Latest member
buckner0121

Latest posts

Top