KilluminatiDre
Full Access Member
- Joined
- Aug 1, 2017
- Posts
- 95
- Reaction score
- 21
295/30/26. They rub pretty bad on full lock turns. Its loud. Any way to stop this?
26s rubbing bad
- Thread starter KilluminatiDre
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I cut part of my inner wheel well liners where they were hitting. There's also a way to stick a 2x4 in there and then turn the wheel to bend it out of the way but I never tried that.
go smaller tires/wheels or trim plastic.
Cut out most of the front of the plastic liners on my plow truck last winter because it was rubbing with the plow on and tearing out the liner. Better than ripping the liner off and sending it under the wheel and then truck.
Did that a few years before. Little sketchy.
Cut out most of the front of the plastic liners on my plow truck last winter because it was rubbing with the plow on and tearing out the liner. Better than ripping the liner off and sending it under the wheel and then truck.
Did that a few years before. Little sketchy.
