2010 Tahoe LTZ Leveling kit issue with auto ride.

[TN_Tahoe]

I recently bought a 2010 Tahoe and installed a 3.5" front and 2.5" rear leveling/lift kit that I installed over the weekend. After install and having alignment done the "service Suspension system light comes on the dash. I've read through some of the threads on here and have ordered rear shock extenders but I'm not finding the auto ride sensor rods to compensate for the change in pitch of the upper control arms and rear height after installing the lift spacers. Anyone know where I can find them? I'd like the auto ride to function properly while hauling my trailer.

 

[kbuskill]

All thread rod... cut to length.

 

[Big Mama]

True. Take one out go to hardware store get same threads on a long threaded rod and you’re done. Good luck.

 

[al2fast]

I made a bracket with a piece of flat metal I had lying around, like the stuff you would use to hang a garage door opener. I put it in a vice and hammered an L on an edge to make it rigid and rattle canned it black. Took measurements before I installed my blocks so I knew how high I had to go.

http://i294.photobucket.com/albums/mm98/AL2FAST/Public/20171202_221526_zpslwwecnfw.jpg