Search results

  1. Shtiv

    Water drip and what sounds like an air leak near ac accumulator

    Went out to check a few things and noticed a water drop near ac accumulator even though i haven’t driven the vehicle in a as few hours, but i have also noticed a sound of air being released in the same area when the vehicle is running
  2. Shtiv

    Does this look right? Cv Axel to knuckle

    The flange on Cv Axel is bending in where it meets the knuckle. I feel like this is incorrect, but not sure what to do, or is it correct? Thanks
  3. Shtiv

    Feels likes wheels are going to come off

    Just replaced shocks on vehicle and upper control arm, then had an alignment done on vehicle and about a week later i have pulling and a wobble (feels like wheels are going to come off) that comes and goes but has me nervous to the point i do not want to drive it. I looked around backside of...
  4. Shtiv

    Different bushing for shocks

    So I’m installing my new shocks, but the new ones do not have the metal insert inside the bushing and the hole in the inside is not large enough to fit the metal insert. Seeking ideas as i need to get these installed. Thank you as always!
  5. Shtiv

    New air ride compressor went bad after a few months

    I replaced my air ride compressor because i thought it was louder than it should be (the sound was normal but didn’t know that due to the Yukon being new to me), so the new compressor seemed to run alot and now is completely toast. I’m wondering if it has anything to do with new changing out...
  6. Shtiv

    Z55 front suspension question

    Hey guys, Looking to buy front shocks but it seems that due to it being “auto ride” is making it tricky for parts store to find front shocks, they question is due to me having z55 suspension does that make the front shocks a special shock? Thanks
  7. Shtiv

    Can’t angle wheel knuckle enough to get upper control arm on

    Any ideas? I’m wondering if it has something to do with the Axel? Thanks?
  8. Shtiv

    Hard turn over especially when cold.....

    Hey guys, I have done a lot of work on my truck and will try and post a spreadsheet of items, but again I am faced with a struggling start especially when cold. I thought I had this solved when I replaced the intake manifold and other parts on the manifold, but apparently not, it is back. I...
  9. Shtiv

    Creaking sound

    I have replaced my sway bar links, tie rods, brakes, cv axel and now have a creaking sound that is almost always present when driving and sounds like it is coming from the driver's side wheel well. I have looked at all the components and nothing screams an issue, I thought maybe I would see...
  10. Shtiv

    Stuck far from home. Battery light came on, now Los of power.

    Hi guys, for frm home and has better light came on, and alternator voltage gauge dropped to 11. At Oreillys, they say everything looks good. But can’t start car as if battery is dead, i jump car car and it starts, but no lights and nothing works. Car drives but with a loss of power. Any...
  11. Shtiv

    Can anyone confirm that these are correct tie rod ends

    I purchased and installed these on my 2002 Yukon Denali, but they didn't seem to fit quite the same as the old ones, and now I have a squeaky front end, not sure if due to these. Was hoping someone could tell me if these are correct for my vehicle? Thank you!!!
  12. Shtiv

    Trying to order a new master cylinder but there is a option for 5 speed and 6 speed???

    I'm trying to decide which master cylinder to order for my vehicle, but GMPARTS is saying there is one for 5 speed and one for 6 speed. Does anyone know how I find out which one I need? Thank you!!
  13. Shtiv

    Want to make sure Im buying correct gear oil for differentials

    Going to be changing the oil in the differentials coming up. This is the first time changing gear oil and Want to make sure this is what you guys would recommend. I have read a bit about it, but want to double-check. Thanks for your input. Looking at Mobil 1 75W90 Synthetic Gear Oil
  14. Shtiv

    What is this line/hose called?

    I was replacing the manifold gasket and right as I was putting it in I broke this line, wondering what it is called so that I can get a new one ordered. Thanks!!
  15. Shtiv

    Question with moving a ground

    I watched a YouTube video where a guy recommends moving the ground that is on the backside of the engine to a chassis ground. Curious if this is okay, and if there is any concern with extending it and moving it? Thanks!
  16. Shtiv

    Upper control arm guide missing pins.

    Noticed on my driver side of my 2002 Denali that the "guide pins" for the guide on upper control arms are missing one of the "pins" and another falling out. To me, it does not look like you can replace these as they appear to be part of the frame, which would not make sense to me. Ideas...
  17. Shtiv

    Oxygen sensor different styles between old and new, is it okay?

    Hi guys, Working on my 2002 Yukon Denali 6.0, and was installing new o2 sensors when I realized that the new one is a different style than the old one. New upstream o2 sensor on right (Bosch), and old that was removed from the vehicle on left, Denso. Rock Auto said the Bosch one is correct...
  18. Shtiv

    Changed coolant temp sensor, then I had a rough idle especially on cold starts...???

    Changed out my coolant temp sensor on my 2002 Yukon Denali, then immediately had a very violently rough idle on cold start? Seems weird to me and wonder if something else happened. Looking to see if this issue makes any sense to anyone? Thanks for any help.
  19. Shtiv

    Dead battery, car turning off while driving........

    Hi guys and gals, I bought a 2002 Yukon Denali about 4 months ago with 200k miles on it, in those four months I have had some issues with a dead battery, the car turning off while driving it (complete loss of power and electrical, everything dead), and random getting in and the clocks have been...
  20. Shtiv

    Lots of pulling even after a large amount of repairs....

    Hi Ladies and Gents, I have been doing a lot of things to my 2002 Yukon recently to get it in tip-top shape, but the more I do, I feel the more issues arise. So, after recently have a professional alignment done, new brake pads and rotor all around, new passenger wheel hub/bearing, new upper...
  21. Shtiv

    Looking for advice on best way to install a double din radio

    I've been shopping for a double din stereo to replace my stock one in my 2002 Yukon Denali. I have watched YouTube videos and done numerous searches and have found unfinished bezels that will allow for a double din radio, I have no problem painting it to match, but the problem is that it does...
  22. Shtiv

    Changing from manual to digital climate control

    Thinking about chaning the manual climate control in my 2002 Yukon Denali to digital climate from a 2003 or newer. Is this possible? Expensive? Pain in the butt?? Does anyone know of any DIY on this procedure? thanks!!!

Forum statistics

Threads
129,525
Posts
1,817,179
Members
92,737
Latest member
DeSexingStick

Latest posts

Top