Search results

  1. CJ Rodarme

    Behind 3rd Row Sub Box?

    Wanting to add 2-3 12s behind my third row in my Yukon. Keeping the the third row is non-negotiable, I just swapped from having a large ported box for four 12s back there for the extra passenger capacity. I want to build my own box, I found a design that I like but it does not have all the...
  2. CJ Rodarme

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Finally starting to work on this thing again after not doing much for about a year. Switched from my 22x12 American Forces on 33" Toyo's to a set of 22x10 Fuels on 35" M/Ts, really happy with the look and a lot more practical for what I do. Trying to keep polished wheels clean while driving to...
  3. CJ Rodarme

    3" Coil Spacer with z71 Springs?

    Over the years it seems that my coil springs have worn out and sagged, which makes sense due to having a couple hundred pounds of audio in the rear. I currently am running a 6" rough country set at about 5" and 3" coil spacer in the rear and want to level it out. Has anyone ran z71 springs with...
  4. CJ Rodarme

    Heated/Cooled Cupholders

  5. CJ Rodarme

    Heated/Cooled Cupholders

    I recently picked up a 2002 LB7 with a Denali interior swap. The console has cooled/heated cupholders, and I’d like to track down another console to swap into my Yukon. How rare was this option? I’ve found next to no info online about them being in Denalis, only Platinum Escalades. I’ll upload...
  6. CJ Rodarme

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Threw my roommates beadlocks on my Yukon and took it out for some snow wheeling over the weekend. Aired down to 5psi it did pretty well, might have to buy a similar setup
  7. CJ Rodarme

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Been a minute since I’ve posted on here. Been waiting on clear tails ever since I got this thing, very happy with how they turned out
  8. CJ Rodarme

    New Carpet Kits?

    Does anyone have experience with doing a new carpet kit in their rig? Looking at the kit from stockinteriors.com, seems like a well put together kit. I've extracted my carpet multiple times and its past the point of saving, I'd like to go with a little darker color than factory, which makes the...
  9. CJ Rodarme

    2500 Shock Swap?

    I feel like I remember hearing something about using GMT800 3/4 ton shocks as a rear shock upgrade, but am having a hard time finding any info on it. My Yukon is long overdue for some shocks, and I'd like to find something that will eliminate the shock spacer that I am using now along with the...
  10. CJ Rodarme

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    For sure, I probably won’t end up doing the other one until the OEM bearing goes bad because of that haha
  11. CJ Rodarme

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    New kryptonite wheel bearing today, and while I was at it detailed all my wheels and threw my 2” spacers back on the rear. Definitely going to have to get a matching bearing on the passenger side, really happy so far with the quality Also should be doing the 07+ brake upgrade soon, just gotta...
  12. CJ Rodarme

    00-06 to 07 NBS Brake Upgrade Question

    On that note, anyone have reccomendations on what calipers/rotors/pads as far as brand goes? I just got the cheapest ones at Autozone for mock up
  13. CJ Rodarme

    00-06 to 07 NBS Brake Upgrade Question

    I had some extra time today and just ended up picking up a single rotor and caliper and bolted it on. Turns out it does in fact clear.
  14. CJ Rodarme

    00-06 to 07 NBS Brake Upgrade Question

    So I am looking to do the 07 brake upgrade on my 03 Yukon, but for a different reason than most. Earlier in the year I purchased a set of 22x12 American Force wheels that were made for a newer Silverado, and they rubbed on the inside of the brake caliper bracket. From the research that I've done...
  15. CJ Rodarme

    How to clean up clear coat on LTZ wheels?

    What’s the best way to shine up LTZ wheels like I have pictured, or any polished wheel with clear coat on it? I’d like to avoid removing the clear and just shine them up a bit
  16. CJ Rodarme

    Cranking Keys on 6" RC Lift?

    Who has experience with cranking the keys or adding leveling keys to their lift kit. I'd like just a hair more up front, and the keys are maxed out. I have 20x12s on 295 Toyo ATII's and I'm concerned with front end wear, and I don't want to make it worse. I noticed as well that my drivers side...
  17. CJ Rodarme

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Lots of changes this week. Went from my rattlecanned Texas Edition 20's on 35s to some 20x12s on 295s, got my front windows tinted and put the tow mirrors back on. Just waiting on my Shifted Industries spacers to come in for the rear and I think I'll leave it alone for a bit. I should probably...
  18. CJ Rodarme

    Do Z springs lift non Z

    Yes, if I remember right it adds 1.5"
  19. CJ Rodarme

    2015 Yukon Wheel Corrosion

    I’m very hesitant to use it, because I want to maintain the painted parts around it. I could try to tape it up but I’m worried it would still mess some of it up
  20. CJ Rodarme

    2015 Yukon Wheel Corrosion

    I just picked up this set of 20” rims off a yukon. They have this weird corrosion in the clear coat. What can I do to fix this? If theres already a thread on it that’d be great.
  21. CJ Rodarme

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Got my 2.5" spacers for the rear in today. Threw them up front for fun just to see how it would look. The 6mm slip spacers didn't end up working for the front, check my thread in the lifted section if you have any advice, I really need some lol.
  22. CJ Rodarme

    Spacers?

    Spacers came in today, but I ran into a problem. I ended up getting the 6mm set since they were closest to 1/4" but they didn't clear. After doing some thinking, I'm wondering if a slip spacer is the way to go. Even if it does clear, it'll still be super super close to grinding, and I'm not sure...
  23. CJ Rodarme

    Spacers?

    They are not. I wonder if it would be safe to run temporarily or not. Regardless, I plan on buying a set made specifically for my application. I'll probably end up getting the 6mm set to be safe
  24. CJ Rodarme

    Spacers?

    I bought a set of the universal 5.5 1/4 inch spacers for mock up purposes and they seem to clear and work just fine. I found a company that makes a 3mm hubcentric, but I am worried that its not going to be enough. For clearance I'm trying to run as small of a spacer as I can
  25. CJ Rodarme

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Put in a new idler arm and bracket yesterday. The steering is night and day different, the old arm was more roached than I thought. Picked up a new abs wire too while I was at the parts store, hopefully will get that installed soon. Also got some American Forces a few days ago, they don't clear...

Forum statistics

Threads
129,231
Posts
1,812,473
Members
92,332
Latest member
jmart157

Latest posts

Top