Search results

  1. C

    Replace Transmission Cooler with TruCool 40k

    I do have small passengers actually, lol. But your point is made. I haven't had it weighed but will have it done. Thanks.
  2. C

    Replace Transmission Cooler with TruCool 40k

    Thanks for the input. I just replaced the rear shocks and suspension compressor. Had a full WDH alignment also. Just curious but why do you suggest it's overloaded? Just for comparisons sake, I took a 4 hour trip in 70* weather and the transmission never went past 185. Recently took a two hour...
  3. C

    Replace Transmission Cooler with TruCool 40k

    Yes.
  4. C

    Replace Transmission Cooler with TruCool 40k

    My bigger concern is hotter temps. In upper 80* weather, I was hitting 200+ trans temp while towing. Trying to avoid that again. Will likely go without the bypass and grab the kit you linked. Thanks! Any install videos/guides out there?
  5. C

    Replace Transmission Cooler with TruCool 40k

    I have an 08 XL Denali with a stock cooler and am looking to replace it with a 40k but have a few questions... - which 40k cooler do I need (thermal bypass or not)? I live in Northern Kentucky and tow a 7k lb travel trailer - what other equipment/parts/tools would would I need to install this...
  6. C

    Installing Pioneer AVIC 8200 NEX - Questions?

    figured it out.
  7. C

    Installing Pioneer AVIC 8200 NEX - Questions?

    Anyone? Stuck right now and can't figure out how to get the rear dvd sound in the headphones.
  8. C

    Installing Pioneer AVIC 8200 NEX - Questions?

    I'm in the process of installing the 8200 NEX, but I don't know where to connect the RCA Audio Outputs for the Rear DVD system. I have the Maestro RR, GM5+, and AV GM5 (harness for the rear DVD system). The pioneer only has RCA connectors for Front L/R speakers and Rear L/R speakers which are...
  9. C

    I installed a avic-8200nex with idatalink gm5 but cant get calls to work

    [delete]
  10. C

    I installed a avic-8200nex with idatalink gm5 but cant get calls to work

    I'm following the instructions but there are 2 different options, but doesn't say which one should be used. It says the following... Diagram:
  11. C

    I installed a avic-8200nex with idatalink gm5 but cant get calls to work

    When wiring this up, for the front and rear speakers, should I be using idatalink rca adapters (listed as low level output) and plugging them into the outputs on the 8200 or should i be wiring the idatalink connectors (listed as high level output) into the 8200 wiring harness?
  12. C

    I installed a avic-8200nex with idatalink gm5 but cant get calls to work

    Ok thx. Do I need anything additional since i have the bose system?
  13. C

    I installed a avic-8200nex with idatalink gm5 but cant get calls to work

    I'm about to install the Pioneer 8200 myself in a 2008 Yukon XL Denali w/ Factory Nav, Bose System and Rear DVD Entertainment System. Here's my current list, am I missing anything? - Pioneer AVIC 8200 NEX - Scosche Dash Kit - iDatalink Maestro ADS-MRR Interface Module (OnStar and Steering Wheel...
  14. C

    Pioneer AVIC 5200 Question

    So I'm considering an AVIC 5200 to replace my OEM nav in my 2008 Yukon XL Denali but have a couple questions. If I'm using carplay via my iphone, am I able to still play video via an external usb drive on the rear screen? Any help is appreciated. Thanks.

Forum statistics

Threads
129,265
Posts
1,813,029
Members
92,368
Latest member
agmanw8n

Latest posts

Top