Search results

  1. Milz77

    Powder Coated KMC Slides

    Few pics of 24" KMC Slides I had glass beaded and powder coated with Tiger Bengal Black. Much stronger than normal paint. Before and after.
  2. Milz77

    Needs low Tahoe

    I have 2" front and rear drop and also on same 24" rims. No rubbing, practicle and takes a lot of wheel gap out. Got all mine from Tony as well.
  3. Milz77

    Shouldn't have stepped into this section...

    My drop was originally a 2" up front and 3" in back which leveled it nicely however I ended up putting 1" spacer in back for bit more clearance and practicality. Rides wonderful on the 24"'s and no rubbing. I have weathertec mud flaps and only had to cut small amount off inside of them so...
  4. Milz77

    Sent mine out to be layed on the ground finally

    Nasty looks sick man!
  5. Milz77

    Finally lowered the Tahoe.

    295/35/24
  6. Milz77

    Finally lowered the Tahoe.

    Looks great. Looks similar like mine. I only have the 2/3 drop though.
  7. Milz77

    Suspension Questions/ Issues

    Here is my 2013 LT with 2" drop both front and back with 24" wheels. Did the OEM struts with 2" drop spindles in front to keep alignment stock. 2" drop coils in back. Runs great both on highways and city streets but I also only have little under 13k miles on truck.
  8. Milz77

    2012 w/ Tony's 2-3/4

    I got the whole kit including sway bars, street performance shocks and struts, etc but either way Tony can get you hooked up for reasonable pricing and his customer service and support is amazing.
  9. Milz77

    2012 w/ Tony's 2-3/4

    Looks good. Here is mine 13' with same drop from Tony.
  10. Milz77

    Belltech Street Peformance Rear Shock Leaking

    Got ahold of Tony and he called me back right away. He is gonna get in touch with Belltech. Hope to have resolved soon and with his support I am certain I won't have any issues. Looks like hairline crack bottom of shock along weld.
  11. Milz77

    Belltech Street Peformance Rear Shock Leaking

    Anyone familiar or have happen where rear Belltech Shock is leaking at bottom? Bought kit from Tony earlier this year and the one rear shock is leaking at bottom where it attaches to the shock extender. It is not leaking from the bolt harness (plus there is no zerk fitting) but leaking around...
  12. Milz77

    285/45 vs 305/40 vs 305/45 on 2/3

    Rim size?
  13. Milz77

    Lower Rear

  14. Milz77

    Lower Rear

    I have 2" lowered in rear and 2" in front with 24"'s
  15. Milz77

    She is finally done!!!!

    4wd
  16. Milz77

    24" tire recommendations

    Good to know Az......I haven't done any road trips and live up north but still useful information. Only run the truck in summer months but hopefully they will last longer than few years.
  17. Milz77

    24" tire recommendations

    I have Lexani LX Thirty 295-35/24 and they run real nice and around $160.00 per tire. Had same with 305's but I was rubbing pretty good with a 2" Front drop and only rubbing minimally with 3" rear drop. No rubbing now with the 295's.
  18. Milz77

    Rear Coil Ride a Bit Bumpy

    Sway are I bought from you for 2013 Tahoe didn't have any relocation brackets. Is this something I need to do or not required. If required what do I need to do or modify?
  19. Milz77

    Rear Coil Ride a Bit Bumpy

    No it is running parallel with body and not perpendicular. Is this not correct set-up?
  20. Milz77

    Rear Coil Ride a Bit Bumpy

    All, Looking for input on above. 2013 Tahoe LT I got the 4" 5305 Belltech drop coils with same Belltech SP shocks but I have a 2" spacer currently for a 2" rear lift and back end is bit bumpy. I don't want to lower any more than it currently is as I need rear travel. Mind you have I have...
  21. Milz77

    She is finally done!!!!

    It's a 2/3 drop but I ended up lifting back up another inch with 2" spacer. The 2/3 kit from Tony comes with the 3 or 4" drop coil for the rear. Adding a 1" spacer gave it a 3" drop and it was level however I only had about 1/2" between the Belltech bumpstops (I didn't want to do the free...
  22. Milz77

    She is finally done!!!!

    Big shout out to Tony and all the others for the help and guidance!
  23. Milz77

    Very Happy with 2/3 Drop Belltech 13' Tahoe

    My apologies. Any way I can delete the thread?
  24. Milz77

    Very Happy with 2/3 Drop Belltech 13' Tahoe

    More pics to follow once I get new tires! Thanks again everyone for all the help and special shout out to Tony for his awesome service and patience with me and all my newbie questions!
  25. Milz77

    Very Happy with 2/3 Drop Belltech 13' Tahoe

    Hi Guys, Just wanted to show few pics of the progress of me 2013 Tahoe without Autoride on 24" KMC Slides. Got the 2/3-4 Belltech Lowering / Cornering kit complete. Just waiting on the 295-35-24 tires to come in. Not rubbing much on the 305's but figured I would go with the 295's to be safe...

Forum statistics

Threads
129,342
Posts
1,814,271
Members
92,476
Latest member
Richie255

Latest posts

Top