Search results

  1. E

    '08 Yukon Denali Airride Suspension Replacement

    Wife's '08 Denali has all shocks leaking. Compressor works. Need recommendations for systems to use to replace airride and go with a standard suspension setup. Thanks guys!
  2. E

    Assistance in Harmonic balancer/ timing cover removal

    You are going to need a puller that is specific to these trucks. They are also listed for other vehicles as well. You will need to place a prybar between the pulley and under the mounting bracket for the A/C compressor to hold it in place while breaking the balancer bolt loose. It will take some...
  3. E

    DTC P0011 A Camshaft Position - Timing Over-Advanced. Stabilitrak/Traction Control turning off,

    Okay guys, update: Changed oil and proceeded to change the oil pressure sensor along with the cam position sensor. OPS went just fine. It was my second one as I had changed it on my wife's first Denali. Cam position sensor, not so much! Sensor basically broke off at the plug and then again at...
  4. E

    DTC P0011 A Camshaft Position - Timing Over-Advanced. Stabilitrak/Traction Control turning off,

    Okay guys, Im going to perform an oil change with DEXOS approved full synthetic 5w-30 and AC Delco filter. I will follow that up with a change of the camshaft position sensor. AC Delco PN 2133826. Once I have made those changes, I will post an update to the thread. Thanks guys!
  5. E

    DTC P0011 A Camshaft Position - Timing Over-Advanced. Stabilitrak/Traction Control turning off,

    Could someone supply me the current, correct, PN's for both the cam position actuator solenoid as well as cam position sensor? I have what I think is correct written down, just want to confirm. TIA guys!
  6. E

    DTC P0011 A Camshaft Position - Timing Over-Advanced. Stabilitrak/Traction Control turning off,

    '08 Yukon Denali w/ 165,xxx miles. Stabilitrak and Traction Control turning off constantly and showing CEL/DTC P0011 "A" Camshaft Position - Timing Over-Advanced. Looking for solutions to the issue. I have researched and found the cam position actuator solenoid and magnet to be the culprit for...
  7. E

    Lights flickering

    Have them check the alternator over the battery. Also, on single battery trucks, use the 140/145A (whichever one it is) over the 160A. I've had over-charging issues along with warning lights going off. Switched to the lower one and now no issues.
  8. E

    '08 Yukon Denali Oil Pressure Sensor Replaced. Gauge still "dead" below ZERO

    Hey guys, just finished replacing the oil pressure sensor on my wife's '08 Denali. Replaced it with AC Delco part # D1846A. With the help of my wife's small hands, we were able to replace it without removing the intake manifold and all that jazz. Plugged it back up and the oil pressure gauge...
  9. E

    FOR SALE: Dark Grey 07-14 GM-SUV Dash Mat

    Have cutout for center speaker? TIA!
  10. E

    Lights flickering

    Just picked up our second NNBS Denali and experienced the problem tonight with dome and headlights. Battery is new as of this week by the seller. Is this an alternator issue? Had the problem in my wife's 08 and went through 2 alternators before it seemed to settle out. Safe to assume the new...
  11. E

    How to: NNBS '08 Yukon Denali Retrofit

    Update: - Switchback wiring: I managed to wire up the switchback LED's prior to install. The leads coming from the LED ring(s) have a plug on them that plug to the control box, that part is a no-brainer. For the input side of the control box, you need constant +, ground, and + for the turn...
  12. E

    How to: NNBS '08 Yukon Denali Retrofit

    No, she wanted to stick with the OEM look. I just finished them up tonight and will post an update on LED wiring and output pictures as well! Thanks!
  13. E

    How to: NNBS '08 Yukon Denali Retrofit

    5/20 Edit: Switchback wiring, DRL bypass update, resealing housings, headlight aiming, etc. See a few posts below. TIA! Okay guys, I've been working on a retro for my wife's '08 Denali this week. Along the way I have tried to document the process and important steps in hopes that it could help...
  14. E

    08 Denali Side Mirror Replacement Options

    Driver side wobbles and does not fold. Motor runs but no fold. I assume stripped gear(s) by previous owner. Passenger side quit folding. Motor runs as well so I assume the same issue. Just recently stopped folding. Sadly, I would prefer mirrors to operate like OEM. Thanks! :thumbsup:
  15. E

    08 Denali Side Mirror Replacement Options

    Any decent options for Non-OEM DL3's? Thanks for the info!
  16. E

    08 Denali Side Mirror Replacement Options

    Needing to replace the side mirrors on my wife's 08 Yukon Denali. We have the power folding mirrors with turn signals, puddle lights, etc. Factory prices are out of the question at the moment so I have been looking at other aftermarket options. I have used 1AAuto for replacement side mirrors on...
  17. E

    08 Yukon Denali Oil Press. Gauge Dead

    I have ordered a AcDelco unit from O'Reilly that should be in tomorrow. We shall see if that fixes the issue
  18. E

    08 Yukon Denali Oil Press. Gauge Dead

    Not sure when it happened, but I realized yesterday that the oil pressure gauge has died. What is this an indication of? I'm not in need of an oil change and I haven't noticed the truck leaking oil in the driveway. No notification lights on on the dash. Is this a gauge issue or pressure sensor...
  19. E

    '08 Yukon Denali: NEW alternator installed, now warning lights for everything are coming on

    Any help?
  20. E

    '08 Yukon Denali: NEW alternator installed, now warning lights for everything are coming on

    I installed a NEW CARQUEST 160amp unit
  21. E

    '08 Yukon Denali: NEW alternator installed, now warning lights for everything are coming on

    It was new. Reman was $145 and new was $160. For the price difference and assurance I went with new.
  22. E

    '08 Yukon Denali: NEW alternator installed, now warning lights for everything are coming on

    Afternoon ladies and gentleman, As of Sunday 10/25 I installed a NEW, not reman, CarQuest 160 amp alternator in the wife's '08 Yukon Denali. Had a message on the dash to service charging system so I drove to Advance Auto for them to check the battery and alternator. Battery had sticker on it...
  23. E

    07-14 Yukon Factory headlights

    Still available?
  24. E

    Liftgate motor gears rattle

    Think I may have the same issue. Would like to know as well! Panel hard to remove and check? TIA!
  25. E

    NEW Replacement climate control

    Can we get some installed pics of these stickers? Everyone loves to post pics on here but cannot seem to find one of these installed. TIA!

Forum statistics

Threads
129,127
Posts
1,810,891
Members
92,215
Latest member
mitchievu

Latest posts

Top