Search results

  1. chevync

    Let's talk about floor mats

    I have a 03 escalade, I purchased a set of weather tech floor liner's. After a few months the one on the driver's side started curling. I tried to use a heat gun to straighten it out with no luck. So I called the company I bought them from. Weather Tech sent me out a new set, I put them in, a...
  2. chevync

    Platinum Grille

    I found a chrome platinum grille for my 03 Escalade, it's on a black escalade, mine is white, will the grille itself unbolt from the black so I can install it on to mine?
  3. chevync

    Fog lights upgrade?

    I just noticed one of my fog light lense is missing, do they make a different style housing? Most I find are cheap made. 2003 Escalade.
  4. chevync

    Wiring harness

    I'm installing a new stereo in a 2005 colorado for a friend. Stock is a am/fm radio. No on star etc. I can't seem to find a plain wiring harness for it? Anyone have a part number for me?
  5. chevync

    Captain to bench

    My 2003 have heated captains second row, did they make heated bench? I'm about to remove my third row, building a storage shelf for my spare and putting train horns where the spare usally goes.
  6. chevync

    I have a jackhammer in my esky!

    Few days ago I was driving and heard a loud sound, sorta like a jack hammer and it felt like the rear drop. Is it normal for the air shocks to over fill and let out air like mine did?
  7. chevync

    DJM end links for 00-06 (used)

    Used for six months, no bolts, just links. Best offer!
  8. chevync

    Drop shocks with extenders.

    I have all four belltech street performance shocks with belltech extenders for 00-06, used for 6 months. 100.00 shipped.
  9. chevync

    Spindles

    Spindle source spindles 2" drop for a 00-06 never used. 85.00 shipped.
  10. chevync

    Catch can

    I have a catch can, in red from catchcan.com I purchased last fall and never used, I'll take 65.00 shipped.
  11. chevync

    DJM end links for 00-06

    I have a pair, used less than six months, 45.00 shipped.
  12. chevync

    Airbag question

    I want to switch my driver side airbag with a 05 airbag, eBay says 02-06 for the airbag I want but I had someone say the 05 won't work with my 03. If it is possible do I have to have it reprogrammed for the new airbag or is it plug and play?
  13. chevync

    Question about stepper motor install

    I'm replacing my oil pressure stepper motor right now, the needle is in a awkward spot, were do I set the needle once I replace the stepper?
  14. chevync

    I think it's time.

    I think it's time to fix my stepper motor, check out the oil pressure.lol Still works just not in the right spot, I tried cycling it a few times, no luck.
  15. chevync

    Chrome mirror covers

    Few weeks ago we had a bad storm, I was on the backroads running about 45-50 mph. I hit a tree limb sticking out into the road, hit my windshield and passenger side mirror, luckily it only left a deep scratch on the painted side of the mirror, I'm thinking about adding chrome covers, anyone...
  16. chevync

    Rear setting high

    Had a few ppl tell me the ass end was setting way to high, I've had it for 6 weeks and I have never heard the compressor turn on, looked under it this evening and everything is there, springs look stock, still had the paper tag hanging on it, can the shocks be stuck in the air? It rides great.
  17. chevync

    Oil pressure on the new caddy.

    I'm hoping it's the stepper motor, few weeks ago it dropped to 1/4 mark, shut it off for a few minutes and fired it up, went back to normal. Today it stayed at 80, when I gave it the gas it moved like normal but a little above 80. Engine runs great no weird noises. So I ordered a new set, time...
  18. chevync

    Oil pressure on the new caddy.

    Took my daughter to a Christmas light show, toward the end I noticed the oil pressure gauge was slowly going down, engine runs great no weird sounds, hit the interstate it's still reading between 8-15, stopped at the store shut it down for a few minutes, it resets and back to normal, did great...
  19. chevync

    I need to level her out.

    I want to level the caddy and keep the airride, what do I need to do? Looks like someone kicked it in the ass and it never came back down.lol
  20. chevync

    Lowering kit for a Tahoe/Yukon/Suburban, etc

    This kit fits all all 2wd/4x4 00-06 Tahoes, Yukons, Escalades etc with or without autoride Front 2 inch Spindle source drop spindles (Never used) Rear Belltech4 inch springs Rear Belltech shock extenders Rear djm endlink kit (never used) All four Belltech Drop Shocks with shock extenders. The...
  21. chevync

    Parting out my tahoe soon.

    I'm going to try and sale my tahoe in one piece local in the next week or so, if it doesn't sale I'll be parting her out. 2500hd hood Depo projectors Complete 2/4 lowering kit, everything including shocks are belltech except for the drop spindles are spintech (never used). Kenwood headunit...
  22. chevync

    New ride in the morning.

    After alot of thinking, I decided I'm not putting anymore money in my tahoe, I'm going to sell it as is or part her out. I took my sister to a local Kia dealership today so she can pick out a new puke green soul. A few cars over was setting this beautiful Cadillac escalade, pearl white, 2003...
  23. chevync

    It's time for a upgrade! 5.3-6.0

    After being ripped off by a bad engine builder and my 5.3 giving so much trouble it finally gave out on me last week on a trip pulling my enclosed trailer to WV, 455.00 tow bill for 135 miles! She still runs but I think it warped the crank after the oil boiled. I've been talking to a engine...
  24. chevync

    2002 Suburban LT, 8.1 w/Allison

    I give up on my tahoe, I just test drove a 02 Burb LT with the 8.1 and allison trans, runs great, has sunroof, fully loaded, good tires, new paint job. Only problem it has 308k miles on it, the guy wants 4500.00 for it, It has plenty of power, oil pressure was perfect, trans shifted great. how...
  25. chevync

    I need a part number

    I want to add a roll pan, but I can't seem to find a hitch that fits up behind the tag, everything I have found goes below the bumper??

Forum statistics

Threads
129,111
Posts
1,810,524
Members
92,191
Latest member
kentf3

Latest posts

Top