Search results

  1. A

    Finished 2006 Denali XL 3" body lift with 33's

    Yes. I ended up with the BDS lift and 37’s. Unfortunately I don’t have the truck anymore but it was really awesome and glad I went down that path. Sent from my iPhone using Tapatalk
  2. A

    Finished 2006 Denali XL 3" body lift with 33's

    I used Performance Accessories kit for the body lift. It can with all the right brackets. There is enough slack in the wiring harnes and lines. I did do a stainless steel break line kit but it wasn’t required. And a BDS lift kit. Sent from my iPhone using Tapatalk
  3. A

    Service Stability

    No luck. The best I can think of is that it’s the yaw sensor underneath the passenger seat. But I have no idea at this point. Unfortunately, the Denali is now with my “ex-wife” so I won’t be able to figure it out. Sent from my iPhone using Tapatalk
  4. A

    Yukon XL 2500 8.1 Oil Cooler Lines Replacement Info

    I think it's easier if you unbolted the front differential. Sent from my iPhone using Tapatalk
  5. A

    My 408 build

    Hey guys. I have a bent valve and now I need some engine work. I was thinking, should I just order a 408 motor for Texas-Speed or build my motor? Sent from my iPhone using Tapatalk
  6. A

    6.2

    You can do a LPE harness to make the 58t reluctor work. Sent from my iPhone using Tapatalk
  7. A

    P0300 code

    Yes that's the one I changed. I'm not getting the p0302 code. The #2 has zero compression and the #1 has low compression. Both places have said that. I do think it's in the valves because it was an all of the sudden issue. The engine have 220k miles or so. So I'm thinking about a rebuild/...
  8. A

    North Texas Engine builder

    Got my Denali back from the dealership saying no compression on #2 cylinder and low compression on #1. They recommended a new engine. So I'm looking to do a blown 408 stroker and I need a builder in North Texas/ DFW area. Does any know of a good one or a shop that does that? Sent from my...
  9. A

    P0300 code

    The sensor code I got was p0161 which is the passenger side o2 sensor. I believe I have the right part. I took it to the dealership and they are saying there is no compression on cylinder 2 and I need a motor/rebuild. When the sensor was bad, I took it off to make sure I ordered the right one...
  10. A

    P0300 code

    So I started getting a p0300 code and the engine is vibrating violently. Took it to the local shop. They said the compression seems low on cylinders 1,3,5 and those are the ones that are missing. Last week I got a code to replace the 02 sensor. I put in a new Bosch sensor, drove 30-50miles and...
  11. A

    Front bench seat swap

    I'm in North Texas. Sent from my iPhone using Tapatalk
  12. A

    Front bench seat swap

    Hey guys. I removed my center console so that I can add a center jump seat. I'm having issues finding the center dash pieces. Can you guys please help? I know there are 2 parts to the center section. The upper piece is the 3port cigarette lighter and ash try. Then for the lower section I was...
  13. A

    eLocker for my 06 Denali

    Can someone help me locate the proper part for an eaton eLocker for my front diff which is an IFS8.25 I believe? I'm going to be running 5:88 gears with my 37s. If you have suggestions on a different eLocker feel free to say so. Sent from my iPhone using Tapatalk
  14. A

    Speedometer adjustment for lift and gear

    Idk if this guy cares. It was a small shop in North Texas and all he does is major trans. It was only a $1000 cash for a tow package rebuild with the corvette servo. But I'll call and ask him anyway. Sent from my iPhone using Tapatalk
  15. A

    Speedometer adjustment for lift and gear

    Ok. I'll look into it. I know I want to do an e-locker in the front and posi in the rear. I was about to do a 4l80 swap but the 4l65 went out before I could get everything together. So I'll have to wait another year until the trans rebuild warranty goes out. Sent from my iPhone using Tapatalk
  16. A

    Speedometer adjustment for lift and gear

    What is the best programmer to fix my speedometer? I'm putting on 37s and possibly 40's one day with 4:10 gears. I've used a hypertech before but it only does 35's. This if for a 2006 Yukon XL Denali. I doing a 6.5" BDS and I already have a 3" PA body lift. Sent from my iPhone using Tapatalk
  17. A

    Oil line blew out

    While driving down the highway today my "oil pressure" message came oil. Luckily it was right before a good exit so I pulled into the service station. After stepping out of the car I saw my trail of oil. When I opened the hood, I saw the lower oil line of the drivers side hanging there loosely...
  18. A

    Building my LQ4 engine in my Denali XL

    I'd love to see you twin turbo this thing. Sent from my iPhone using Tapatalk
  19. A

    front end rebuild question

    My steering was fairly sloppy when I replaced the pitman and idler arm. I can say afterwards, it was very tight and précis however, I expect that would always be the case when installing new pitman and idler arms. The point for me was that I don't want to do it again and the cognito kit is...
  20. A

    front end rebuild question

    This is what is on my 06 Denali XL http://www.cognitomotorsports.com/cognito-pitmanidlersupportkit-pisk2006-truck.html#product_tabs_installation_instructions Sent from my iPhone using Tapatalk
  21. A

    Need some honest advice on what SUV to get

    I'll check my 06 Denali when it's get back from the Audio stop. Sent from my iPhone using Tapatalk
  22. A

    Need some honest advice on what SUV to get

    They have column locks. Even my 96 Chevy has a column lock. Sent from my iPhone using Tapatalk
  23. A

    4l80 swap with manual transfer case

    I'm looking at doing a 4l80 swap on my 06 Denali. Since I have a Borg Warner tcase, I'd have to get the 149 tcase to do the AWD 4l80 swap. Since I've converted my front seats from console to front bench seating, I was thinking I could do a manual 4wd transfer case which would get me better off...
  24. A

    SSBC Tri-Power Brake Install (Front and Rear)

    Is that kit any better or bigger than the nnbs upgrade? Sent from my iPhone using Tapatalk
  25. A

    Extra rear axle

    Just wanted to bump this thread. See if anyone can think of what models are years will have the same rear axle as my 06Denali. Sent from my iPhone using Tapatalk

Forum statistics

Threads
129,127
Posts
1,810,868
Members
92,214
Latest member
George ramos

Latest posts

Top