Search results

  1. T

    4l85 swap into 00 Tahoe with cammed 6ltr issues

    I used the tune from an 07-09 Express van my setup was for a gen4 I would suggest that you go back to your old tune have that tune file changed in the transmission tables to the 80e option, and not go with a "segment swap" file It's a drop down option now, no custom OS or segments needed any...
  2. T

    4l85 swap into 00 Tahoe with cammed 6ltr issues

    I used the same harness on an 08. It was a 5.3 and 4L60e combo. I also did the 80e swap. I tried using the segment swap option in HPT but I had starting/running issues. I flashed another 6.0/80e tune that I knew worked and that solved my issue. If your tune works with the ABS sensor, then...
  3. T

    07-14 escalade G5 Taillights for Sale

    what kind of reverse LEDs are those?
  4. T

    Show off your interior lighting mods

    what kind/brand are those round LEDs? Did they come with the resistors already installed?
  5. T

    Compcam Camshaft Kit Upgrade!!! 2007-2014 Models

    you might list what all is included in the kit Who spec'd the cam out? What were your goals with that cam? Shift points?
  6. T

    Rear trailing arm snapped on my two week old Yukon Denali. Pics and story

    On the axle tube itself. It looks like someone had a hook on the tube in 2 places and was pulling backwards at one time. It's almost as if someone was pulled out in reverse at the beach or a mud hole, or worse . . . off of the repo truck. Did you buy this truck new? Did it make really...
  7. T

    Engine Swap....someday

    I've done all kinds of engine and motor swaps. They're pretty easy. LS2s are nice, but some have the 58x reluctor wheel on them and that's not what you need Seeing how you have 5.3 now, there's all kinds of baby cams that you cam put in with a set of long tube headers, and then add in a...
  8. T

    5.3 engine

    Assuming you referring to long block to long block Yes it will drop right in Use your original motor mounts Orginal intake, oil pan (as long as the low level float is is the new one) All Orginal accessories You will need a DOD delete kit. (8 new lifters, lifter trays, head bolts, head gaskets...
  9. T

    400HP to the wheels in a 5.3 - heads, cam, FAST intake

    it was re-cammed with a smaller cam tonight. It'll get a dyno tune again shortly. New cam is 224/230 .581 .592 -110
  10. T

    Engine Swap....someday

    It's very easy You really only need the short block. You can reuse all of your other stock parts for the swap
  11. T

    400HP to the wheels in a 5.3 - heads, cam, FAST intake

    Here's what it takes 08 Silverado CC 4L60e trans (4-speed) 5.3L 11.0:1 compression PRC 2.5 5.3 milled 60cc Cometic .040" head gaskets FAST LSXRT 102 intake LS7 TB EPS 227/230 .614/.609 114LSA+2 advance K&N cai OBX Long tube headers with resonators SLP pulley PB lvl 2 Circle D stage 2 258mm 3c...
  12. T

    Double stack 50 LED light bar questions

    any pics of this ?
  13. T

    Whatʻs the next step for more power???

    I post about these cam swaps all the time on perforamancetrucks.net if you want part numbers . . Ls7, or BTR (brian tooley racing) lifters LS7 lifter trays 4.8 valley cover - get it with the gasket lunati, PRC, BTR dual valve springs - any of those will work 5/16" 7.4 hardened push rods -...
  14. T

    Whatʻs the next step for more power???

    Seeing how you have the newer engines with the 243/799 heads. You can run a bigger cam, but you must do a DOD/AFM delete, before doing anything. Meaning swap out the lifters and a few other parts. Your current lifters are the weak point of your engine.
  15. T

    Whatʻs the next step for more power???

    That's a funny cam card 646-431-13 Specs 212/224 .500 .500 -115 LSA It's a small non aggressive cam. With that small of lift I'm guessing that they're saying it works with the DOD/AFM lifters . . . . And anything over stock I would swap them out. They already fail with the stock...
  16. T

    Whatʻs the next step for more power???

    what size did they spec?
  17. T

    Whatʻs the next step for more power???

    pass up the heads and cam swap . . . have ya'll seen this ? budget turbo setup? http://ls1tech.com/forums/forced-induction/1672280-3-performance-1500-chevy-truck-single-turbo-build-thread-production-system.html
  18. T

    Whatʻs the next step for more power???

    Average time for the 99-07. 6hrs Cam swap + DOD delete 10- 12hrs They're not that hard
  19. T

    Rear Main Leak. Thicker Oil?

    Are you sure that its not leaking around the oil filter? Rear main seals are a rare thing to have an issue with Sent from my SAMSUNG-SGH-I337 using Tapatalk
  20. T

    2012+ Nav Units

    how is this done on the 2007 with Navi ?
  21. T

    1998 tahoe LS swap

    everyone has seen what original motors look like . . . . let's see pics of the new stuff !
  22. T

    Whatʻs the next step for more power???

    Cons? . . . hitting the button all of the time. . . . Driving around all of the time with a tune that has less timing in it.
  23. T

    Whatʻs the next step for more power???

    The TSP 220 can make 380 - 400 with a set of ported heads and better intake what are your goals other than 350hp? Other bolt ons? Gears? Stock stall or are you willing to go bigger? What's the truck used for mostly? Ever at the drag strip? Any roll racing? smooth idle or choppy? Tranny mods...
  24. T

    Whatʻs the next step for more power???

    cam swap it . .290-310 HP . put a TSP 220/220 .581 .581 -112 or go bigger and put a bigger cam in it with a 3K or so stall in it later on
  25. T

    transmission issue.

    get the tranny warmed up first and fully filled before taking it out for a run . . .

Forum statistics

Threads
129,127
Posts
1,810,882
Members
92,215
Latest member
mitchievu

Latest posts

Top