Search results

  1. Booyahzman

    Steering Stabilizer for Lifted Yukon

    Hey Truck Experts! I lifted my 2003 Yukon a couple years ago with Tuff Country's 4" lift kit (picture of the approximate lift parts attached) and love the new stance! However, ever since doing so I will get the "death wobble" when hitting certain bumps or wide crevices on the road over about...
  2. Booyahzman

    Yukon to Denali Front Clip Swap

    For the life of me and after several searches, I cannot find any forum posts or sites regarding the Yukon to Denali front end swap. I remember it being fairly easy, but wanted to confirm before I decide to buy a Denali front-end clip. For the Yukon, is it a straight bolt on, or is there more...
  3. Booyahzman

    Brake Line Extension - Do I Need Them?

    Just got done putting a lift onto the Yukon and adding a bit more to the back with some replacement MOOG (Z71-like) springs and Bilstein shocks. From my measurements, it looks like I gained about 4-5 inches from the stock height all around! I haven't finished putting the rear wheels back on to...
  4. Booyahzman

    No Heat coming from Rear Vents

    Where did you find the replacement housing part? I have a good friend who works on GM vehicles at a dealership and gets me pretty good prices for parts and labor. I think I'll hit him up to see if he can get this part for me... Sent from my SM-G930T using Tapatalk
  5. Booyahzman

    No Heat coming from Rear Vents

    Great video, thanks @mals ! That's exactly what I fear happend too. I wonder if I can just replace the blend door or if I need to replace the whole unit.
  6. Booyahzman

    No Heat coming from Rear Vents

    Hey all, Hoping to get some help on an issue before I start tearing apart the rear heater or A/C unit. I've done a bit of searching and reading and have gained a lot of knowledge! Long story short, heat is not coming out of the rear vents. I had a problem where the front vent--specifically...
  7. Booyahzman

    Easy 4-Hi mod - Simple All High Chip 03-06 model years

    Definitely going to be buying one of these. Question, I have some cables I bought from the RetrofitSource when I installed my projectors that keep my lows on with my highs. Do you think I should remove these when installing this circuit board, or will it not matter?
  8. Booyahzman

    Easy HID retrofit

    I recently purchased mine from a member on the HIDPlanet forums by the name of Thedrummer. Good luck, this is an amazing upgrade to any headlight! Sent from Tapatalk Mobile, please excuse any auto-correct errors.
  9. Booyahzman

    Headlight Wiring

    Thanks, SLCHOE! Just what I was looking for. Sent from Tapatalk Mobile, please excuse any auto-correct errors.
  10. Booyahzman

    Headlight Wiring

    Hey all, I'm trying to figure out some things with the wires going to my high and low beams, but can't find a good wiring diagram to confirm what I want to know. My vehicle is a 2003 GMC Yukon SLT. The high beam connection has two wires: a black (or dark-colored) wire and a green/white...
  11. Booyahzman

    Headlight Fuses/Relays

    So I've been doing some troubleshooting with some wiring and installing projectors into my truck when I put a bad connection together and I believe blew the fuses for my low and high beams. However, I'm not sure exactly what I'm looking at or what I need to replace. Do I need to replace the...
  12. Booyahzman

    Looking for some LED Tail Lights...

    Hey all, New around here and am looking to mod my new ride (2003 Yukon)! I'm looking to see if anyone knows if there are any aftermarket tail light makers that configure the light pattern, or LED layout to be simliar to the Escalade tail lights of the '07+ trucks for the 2000-2006...
  13. Booyahzman

    Yukon Died on Short Road Trip

    Got some news from my mechanic. He says that the adapter between the transfer case and transmission was split, but he has no idea how or why considering that I wasn't trying to push the truck at the time. However, the transfer case and transmission themselves appear to be okay. Weird.
  14. Booyahzman

    Yukon Died on Short Road Trip

    So I've owned this truck for just over two weeks, and thought I'd take it out on its "maiden voyage" from Denver to Colorado Springs, about a 160 miles round trip, with a few hour break in between. I've been very careful not to push the truck hard at all for these first few weeks to get to...
  15. Booyahzman

    New Owner, Reporting in...

    I'm proud to say I'm an owner of a 2003 GMC Yukon SLT (no autoride) finally! After looking for about a year, I think I found the one I wanted. I've had quite a few posts here and there and lurked here on these boards all this time learning and finding out what all I can do to these trucks...
  16. Booyahzman

    Driver seat is weird but why!?!?!?

    I'm interested to know the solution or root cause of this myself. In my search for a Yukon, I came across one with this oddity. I moved on thinking this could be because of a larger issue, but if it's an easy, minor issue I may revisit the truck. Sent from my SM-N900T using Tapatalk
  17. Booyahzman

    Projector and HID's

    Did you ever create a build process for those quad retrofits? I'd love to see how you put them together for my own retrofit someday. Sent via Tapatalk 4
  18. Booyahzman

    Gear Axle ratio question

    Yeah, if I regear it would likely be too 4.30 as a lift would definitely be in the foreseeable near future. Also another reason I'm wondering if 3.42 gears would be sufficient if I lift before I can regear. Sent via Tapatalk 4
  19. Booyahzman

    Gear Axle ratio question

    I've been in the hunt for a good Yukon for awhile and found a nice 2005 with everyone I've been looking for except for the gear axle ratio. I had wanted a 4.10 gears, but found them to be very rare on non XL models. So, I've been settling on 3.73 gears, but none of the trucks I've looked at...
  20. Booyahzman

    4WD vs AWD

    Thanks for the replies, everyone! Sent via Tapatalk 4
  21. Booyahzman

    4WD vs AWD

    Hey everyone, I'm in the search for a 03+ Yukon, and have always sought one with the 4WD system due to wanting to lift it, but would also like to get more information on the differences between the 4WD system and the AWD system. I know the 4WD system basically has a 2WD, 4WD, and an auto...
  22. Booyahzman

    Thinking I might buy...

    So the search is still on... I found another one local and wanted to get everyone's opinion. It's a 2003, 140k miles, 4WD, not the 4.10 gears, has the third row, but seller is asking quite a bit less than normal. The down sides are a couple good scratches on a single door, a tear on the...
  23. Booyahzman

    Thinking I might buy...

    I have actually been looking in the Dallas/fort worth area, but I'd I'm going to drive all that way it better be for the vehicle I want. Though, I agree. Texas definitely has several Yukons and Tahoes for cheap! I may end up buying a truck from Texas and driving it home.
  24. Booyahzman

    Thinking I might buy...

    I guess it would depend on what it is (make, color, etc), other options (leather, third row, etc), and what price.
  25. Booyahzman

    Thinking I might buy...

    So, I'm looking for a specific truck, preferably a Yukon but would take a Tahoe... Years: 2003-2005 Models: Yukon (non XL) or Tahoe Package: SLT or Z71 Colors: Black, dark grey, maybe white Mileage: below 150k miles, preferably below 130k Must haves: 4WD, 4.10 (GT5) gears, Would like...

Forum statistics

Threads
129,125
Posts
1,810,835
Members
92,211
Latest member
patrickleeleep

Latest posts

Top