Search results

  1. N

    07 Yukon XL - Shake After Lowering Belltech 2-3/4

    Finished install. No more bottoming out or rubbing issues. Did not solve the shimmy at 65 mph and above. Still have it. I tilted my mirrors down when on the freeway to look at the rear wheels. They were spinning perfect without any wobble what so ever. Maybe thinking it has something to...
  2. N

    07 Yukon XL - Shake After Lowering Belltech 2-3/4

    Update; Got the DJM shorter sway bar links installed. Made a big difference. Rear end feels a lot more planted. Doesen't have a "big swaying boat" feeling in the rear like the stock swaybar links did. Today, going to install the DJM lower link relocating brakets. Will update after...
  3. N

    07 Yukon XL - Shake After Lowering Belltech 2-3/4

    Thanks for the info Tony. I looked under the rear end today. I am now currently just resting on the bumpstops. The top 3rd of the coil is compressed. Not sure that the coil is supposed to already be compressed that much at ride height.....? When I completed the install, I had about 3/4"...
  4. N

    07 Yukon XL - Shake After Lowering Belltech 2-3/4

    So at 4" drop, there are no bumpstops being used? What if the rear end bottoms out or it can't travel that much? If the 1" spacers are used, then the bump stop brackets will not have to be removed? What does the DJM HWare kit do (besides shortening the swaybar links)?
  5. N

    07 Yukon XL - Shake After Lowering Belltech 2-3/4

    Can't be the wheels out of balance. I drove about 125 miles on the freeway to my brothers house at stock height with the Concept 24 wheels on and had no vibrations what so ever. Tony - Which bracket are you saying has to be cut off? Should I just try and trim about 1" off the belltech...
  6. N

    07 Yukon XL - Shake After Lowering Belltech 2-3/4

    Just lowered using NorcalSS Beltech kit. 2" up front, full 4" in the back. Has Concept 24 wheels with 305/35R24. Aligned after the kit was installed. Here are the alignment measurements. Left Front; -0.3deg Camber 3.7deg Caster 0.04deg Toe Right Front; -0.1deg Camber 4.2deg Caster...
  7. N

    Debadged and now I have a problem along with an irritated wife

    x2 on the 3M adhesive remover. Used it on the XL when I removed all the badging and moulding. Used a meguiars pure polish after to remove any discoloring. Finished up with zaino.
  8. N

    BYE BYE SIDE MOLDING>>HOW TO/PICS on removing side moldings

    Here is how I did mine; 1. Wash and dry the area above and below of the moulding before starting. Use min 20 lb monofiliment fishing line. Cut about a 2 ft length. 2. Using 2 fingers, run the line behind the moulding and "saw" back and forth all the way down the moulding. Don't saw...

Forum statistics

Threads
129,211
Posts
1,812,231
Members
92,310
Latest member
Ron505

Latest posts

Top