OP
OP
GusSanchez300
Full Access Member
I notice that, I'll keep checking to see if there is anything else new
2016 HID install problem
- Thread starter GusSanchez300
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
GusSanchez300
Full Access Member
So this was part of the relay kit I got, yes past tense, I cut it off bc it was reaching high tempts and anything that touched it would melt. I didn't notice no difference after removing it
OP
OP
GusSanchez300
Full Access Member
It is a resistor but for vehicles that show burn bulbs
The canbus, is to eliminate codes and that's it, at least from what I know.
OP
OP
GusSanchez300
Full Access Member
OK so even with the relay kit the lights still flicker, it came with a 30 amp relay, I've notice that most kits come with 40 so I'm going to go to the shop and ask them to replace it for the right one and let's see what happens
OP
OP
GusSanchez300
Full Access Member
i changed it to 35w canbus to get rid of the relay and any other issue. working fine so far.
55w was pulling to much even do it was 9-16 v
i will be using those balast for my fog lights instead and will order 55w with canbus for the head lamps to avoid any headaches
55w was pulling to much even do it was 9-16 v
i will be using those balast for my fog lights instead and will order 55w with canbus for the head lamps to avoid any headaches
OP
OP
GusSanchez300
Full Access Member
Does anyone know why after installing a kit with a canbus, the lights are always on and auto doesn't work.
any idea why?
other than that, no more issues
any idea why?
other than that, no more issues
