Bought a 2002 Yukon XL K2500 8.1 liter 4x4

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
MPDano

MPDano

Full Access Member
Joined
Apr 10, 2016
Posts
139
Reaction score
29
Location
San Diego, CA
Yup, that's about how mine looks. Both driver and passenger side are shot. The seat backs are okay and the back is pretty pristine along with the carpet.

I'm struggling with buying new covers or keeping an eye on ebay to find a used one that will match the slight wear on the seat backs. The seat backs are the expensive ones to replace. IIRC, it was about $300 per side for the backs.

I also have the rubber coating peeling from the center console. It'll take some scrubbing but the rubber isn't too hard to rub off and go for the plain look.

The seller of my seat bottom quoted me $225 shipped for the back. Reasonable considering all the material.
 

Wake

Full Access Member
Joined
Feb 14, 2012
Posts
418
Reaction score
20
Location
Stafford, VA
I think I'm just going to keep an eye on ebay and in the meantime use an iron-on patch on the bottom-side and stitch the rip together from the top. My truck will probably only see 2000 miles a year or less so I'm not too concerned about making it pristine.
 
OP
OP
MPDano

MPDano

Full Access Member
Joined
Apr 10, 2016
Posts
139
Reaction score
29
Location
San Diego, CA
For documentation, looks like I don't have an Alison. MN8 : 4-speed HD Automatic Transmission- 4L85E
 
OP
OP
MPDano

MPDano

Full Access Member
Joined
Apr 10, 2016
Posts
139
Reaction score
29
Location
San Diego, CA
Nice, what's the mpg

Not really sure. But the Desert trip was cut short as my radiator plastic side tank cracked on our way. Good thing for insurance and they covered both trailer and suv to tow back to my house. Got the radiator ordered as none local. At least it happened within 15 miles of my house. Never overheated.
 

thirdcoast

Supporting Member
Joined
Nov 14, 2011
Posts
126
Reaction score
84
Location
Victoria, Texas
Go to GM website and you can get a build sheet with your VIN..

Mine was a 3.73, but you could order them with a 4.10:1 which folks pulling campers did freqently.. I never had a problem with mine pulling up to 10,000 lbs with the 3.73's.

TC
 
OP
OP
MPDano

MPDano

Full Access Member
Joined
Apr 10, 2016
Posts
139
Reaction score
29
Location
San Diego, CA
Go to GM website and you can get a build sheet with your VIN..

Mine was a 3.73, but you could order them with a 4.10:1 which folks pulling campers did freqently.. I never had a problem with mine pulling up to 10,000 lbs with the 3.73's.

TC


Good to know. I thought it would do better on a pretty steep grade as it was topping out at 45 mph, but in comparison to my 4.6 Expedition which only did 20 mph up it. I had it in Tow mode and surprised towards the top it kicked down.
 
OP
OP
MPDano

MPDano

Full Access Member
Joined
Apr 10, 2016
Posts
139
Reaction score
29
Location
San Diego, CA
Installed a brand new radiator. Put a lower temp thermostat (180) and new belts. Not a leak in sight. Temps on tranny and coolant are nice now. Flushed and filled with Dex-Cool as the PO had the green stuff in it.
 
OP
OP
MPDano

MPDano

Full Access Member
Joined
Apr 10, 2016
Posts
139
Reaction score
29
Location
San Diego, CA
...also, cleaned off the K&N Filter, waiting for it to dry so I can oil it up, then install.
 

Forum statistics

Threads
129,117
Posts
1,810,733
Members
92,204
Latest member
22loweryak
Top