06blackhoe
TYF Newbie
- Joined
- Nov 6, 2015
- Posts
- 1
- Reaction score
- 0
Hey guys I was wondering how hard is it too replace the knock sensors. If any one has a write up about it that would be awesome thanks
Knock sensor!!!!
- Thread starter 06blackhoe
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
U Tube it is not hard I used all OEM parts only.
It will cost you a little more for OEM but they are worth it.
The cheapest OEM Knock Senders I found was on Amazon but that was over a year ago I changed out mine.
But I did use Felpro intake manifold gaskets
It will cost you a little more for OEM but they are worth it.
The cheapest OEM Knock Senders I found was on Amazon but that was over a year ago I changed out mine.
But I did use Felpro intake manifold gaskets
As long you going to take it apart replace both of Knock senders there not all that much money but if you don't and have take it back apart to do the other one keep it mind the intake gasket is $70.00 alone.
I think it cost me around $200.00 for all the parts.
I think it cost me around $200.00 for all the parts.
jcevans7
Full Access Member
Just bought 2 sensors a wore harness and gasket for about 160 off amazon.
Sent from my SM-N910T using Tapatalk
Sent from my SM-N910T using Tapatalk
