Denali Gauge Cluster Transferred to Base Model

Justinj360 said:

Well looks like it's a no go. It was hauled away before I could get to it. I can still find a gauge online and install it right?

Click to expand...

Justinj360 said:

How hard would it be to transfer the trans temp gauge to mine?

Click to expand...

Justinj360 said:

Are there any good write ups for this?

Click to expand...

about20ninj45 said:

First put on parking break, then shit gear all the way to first, then remove trim cover. There are 4 12mm screws holding in the cluster in all 4 corners. Remove those and cluster will come out. There is also three plugs to remove from the back of the cluster before it will come out

Click to expand...

about20ninj45 said:

First put on parking break, then shit gear all the way to first, then remove trim cover. There are 4 12mm screws holding in the cluster in all 4 corners. Remove those and cluster will come out. There is also three plugs to remove from the back of the cluster before it will come out

Click to expand...

mattt said:

I don't know about about20ninj45's cluster but the one in my 2004 Tahoe and 2001 Suburban was held in place with 4 screws with a 7mm head. Both of my vehicles also had only 1 plug on the top/back of the cluster. The cluster comes out of the vehicle fairly easily, 10 minutes max.


A good write up for adding trans temp gauge is here...
http://z71tahoe-suburban.com/iboard/index.php?showtopic=19909

Click to expand...

BillBlatt18 said:

Just picked up a 2500 cluster for my 02 suburban. I'll post up when I do the swap


Sent from my iPhone using Tapatalk

Click to expand...