Shaky Side Mirrors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Justinj360

Supporting Member
Joined
Jan 2, 2014
Posts
470
Reaction score
75
Hi everyone,

My 2004's side mirrors have developed a constant shake while on the interstate. First my driver's mirror started to do it and now my passenger side just began about a month ago! It slowly gets worse over time. It's not the whole mirror that shakes but just the glass. I've tried pushing on the centers of them but that did nothing and I didn't want to crack them so I didn't push extremely hard. I also recently tightened the bolts down to see if that would help and, of course, it didn't either. And of course you can't remove the glass without cracking the mirrors (can you?). These mirrors have all the options (Power fold, auto dim, heated, puddle lights, etc.). The ride quality on the interstate is pretty smooth I think. I usually drive around 80. I also have to drive on a dirt road from time to time. Could that be a factor?

Anyone else have the same problem? It's driving me nuts!!
 

massivespl

I'm not mean, I'm honest.
Joined
Nov 25, 2013
Posts
2,197
Reaction score
1,872
Location
Michigan
U can remove the glass. It just has some clips that hold it on. If u look at the replace glass peices online u can see how they attach.. I have a wall of subs and my mirrors shake like crazy and have fell off before so I just amazing gooped them on.
 
OP
OP
Justinj360

Justinj360

Supporting Member
Joined
Jan 2, 2014
Posts
470
Reaction score
75
I've tried to remove one from a Suburban at a salvage yard and it ended up cracking like crazy no matter how easy I went. What's the trick? I have replaced my passenger side mirror within the last year so I'm aware of all of the little clips in a circle on the back. Is there an easy way to unclip them?
 

Mr. 960

Full Access Member
Joined
Mar 24, 2011
Posts
327
Reaction score
37
I just stick a large screw driver between the mirror and the round mounting plate and carefully pry out. It ha worked for me all the time. I've only worked on the power folding mirrors though. The driver's will tend to shake a bit b/c it is a heavier glass due to the auto dimming feature and the black goo that is in it. Not much to tighten down on the motor once you remove the glass.
 

Forum statistics

Threads
129,130
Posts
1,810,935
Members
92,224
Latest member
jhefner

Latest posts

Top