Autopage RS730 alerts on rear hatch even when disarmed?

Slammedchevy01 said:

Autopage RS730 alarm, alerts trunk even when disarmed?

Hi all,

Have a 10 year old Autopage RS730 that has been falling, due to a trunk trigger on my 2003 Tahoe.

The weird thing is the remote beeps/alerts even when it’s disarmed to the trunk, and includes the trunk Icon.

What would cause this and how to fix? Or how bad would be replacing with similiar viper?

Click to expand...

Doubeleive said:

there is probably a way the reset the alarm brain, look for documentation or find a car stereo shop that has been around for many years.
if reseting the module does not correct the problem then I would be looking at a new alarm, viper is pretty good and has a lifetime warranty.
if you are unable to find documentation on the alarm or a shop that is familiar with it then you could try posting on the12volt.com but responses are slow on there you might not get a response for a while, but many alarm tech's do go on there.

Click to expand...

Slammedchevy01 said:

Thank you! Will try and research a reset, I have the manual and box still LOL and found manual online.

Yes, will def go viper or DEI product if I do it again. Posted on 12 v without luck so far, I remember that forum!

Click to expand...

Slammedchevy01 said:

Thank you! Will try and research a reset, I have the manual and box still LOL and found manual online.

Yes, will def go viper or DEI product if I do it again. Posted on 12 v without luck so far, I remember that forum!

Click to expand...

Return To Factory Default Setting; Factory Defaults And Reset; Trouble Shooting - Autopage C3-RS1100 OLED Installation Manual [Page 29]

Autopage C3-RS1100 OLED Manual Online: return to factory default setting, Factory Defaults And Reset, Trouble Shooting. 1. Turn The Ignition On Then Off 3 Times And Stay In Off Position. 2. Push The Valet Switch 12 Times (Holding In On The 12 Long Chirp Is Heard Then Release The Valet...

www.manualslib.com

Doubeleive said:

also a simple google search found a standard procedure, you just to need to find the button (valet switch)

Return To Factory Default Setting; Factory Defaults And Reset; Trouble Shooting - Autopage C3-RS1100 OLED Installation Manual [Page 29]

Autopage C3-RS1100 OLED Manual Online: return to factory default setting, Factory Defaults And Reset, Trouble Shooting. 1. Turn The Ignition On Then Off 3 Times And Stay In Off Position. 2. Push The Valet Switch 12 Times (Holding In On The 12 Long Chirp Is Heard Then Release The Valet...

www.manualslib.com

Click to expand...