What did you do to your NBS GMT800 Tahoe/Yukon Today?

TheAutumnWind · Mar 18, 2018

AltxF4 said:
The rain put a damper on what I had planned, so I went through the front end, and lubed all of the zirks that I know of with Valvoline GM approved red MP lube. Refreshed the CV boots with Sil-Glyde, this stuff workd great on re-conditioning rubber. I would have used it on the ball joint boots, but they are too weathered and cracked to the point that using it might cause them to come apart. Will do some research soon on the best ball joints and tie-rods soon.

You using silglyde sg8?

RyanJW · Mar 18, 2018

AltxF4 said:
Put another set of shocks on today... this time I put on the Bilstein 4600's along with the HD spring in the rear. It is significantly better now! I don't feel like I am twerking as I am driving down the road anymore! Replaced the front jounce bumpers while I was in the front.
I also replaced the front sway bar and end link bushings with the Energy suspension PU bushings, and I used glorious amounts of Formula 5 when installing them.

Sounds great! I've got the dreaded rubbing noise when going over a rough dip in the road or a speed hump so I'm thinking about doing the whole lot of shocks, sways, bushings. Any suggestions?

95escahoe · Mar 18, 2018

Over the weekend I got the passenger rear outer Denali door handle on, color matched looks so much better and scored these other handles off FB hopefully have them on the end of the week

Sent from my iPhone using Tapatalk

Hitahoe · Mar 19, 2018

Got my girl some fresh paint a hd hood and some new tail lights

AltxF4 · Mar 19, 2018

TheAutumnWind said:
You using silglyde sg8?

Yes, SG8. The stuff really gets into the rubber.

05Single · Mar 19, 2018

95escahoe said:
Over the weekend I got the passenger rear outer Denali door handle on, color matched looks so much better and scored these other handles off FB hopefully have them on the end of the week

Sent from my iPhone using Tapatalk

Ptm ftw

Firm · Mar 19, 2018

Gave the old Slade a good wash and a coat of wax to get rid of the winter grim. So nice to have her clean again - it was a long winter. The truck is holding up well though.

eFwUVjlb65uYo4ompqMcl0yg-EwCl-5VqRG8R4Ql3kHkN1ROpC4VWNs7cqgTkqjOCICYYpofmNgRq3TcA9xvqB5kP2iKoNmUzrVtL-b6EvW9qMM_DPr103dvdkLPk_yAzcNyH3wpzF_IlaXGWeSPvRDLTiB9p7hmSecbfxT9h9ZAJ63ZH1qus8MM6KPzmRSGVKG0wBn8_unWyHU7YvlfmwWaJnpUJrJL2owUnCY3uhJFuuDtb0K-VAXOkQJZRVfaXo7c_oVoXTlQbw8QIXed3zuD_-Ym56yENICsK7Zu7cUc5TU0iDs8JjTh2it3WhLdCQKFCeEUB16BNH-G-y1YeK_W1ozbjcrNpACjG5pCk4y5UKiDYxTYrZGcgqCd9IatE4yy_iyQUir9Z3-HKfhqVJH6Z8sAJkPrsR0uYxQaEFIu5fCHlxBxV_NL7SCsZooEldsUz_R3u11GjJu2z1HqP6mBUeYNg3HAJuEL1d5ETCt8eIdF1W2-IxLSIqEoMriGi_B3XlnpCN4sI-n0VkgeEtwdqDpauXJ6XNn7lHHqKhE7D2O7iVeM0y0W46cnrOIM8ikC7MQ5DJIBHR6XZdM1orFfubgU7dHK=w1150-h863-no

00'BlueSteel · Mar 19, 2018

Looks good man, love the wheel and tire setup. Makes for a great stance.

Sent from my iPad using Tapatalk

Pilot · Mar 19, 2018

Shot some video of the latest mods this weekend.

In other news, check engine light is on and computer is throwing P0302 code (cylinder 2 misfire for those who don't know). Going to take it to the mechanic in the morning. Maybe the motor is shot and I need to swap it with a tuned LS3?

Devilmk4 · Mar 19, 2018

@Hitahoe ...You make me want to sell my yukon 2500 for a tahoe. Looks very very nice

What did you do to your NBS GMT800 Tahoe/Yukon Today?

TheAutumnWind

Full Access Member

RyanJW

TYF Newbie

95escahoe

Full Access Member

Hitahoe

TYF Newbie

AltxF4

Member

05Single

afraid of the dark

Firm

Member

00'BlueSteel

Full Access Member

Pilot

Full Access Member

Devilmk4

Full Access Member

Similar threads

Forum statistics

Latest posts