W8TVI
Full Access Member
I'm pretty sure you just need to make sure you are using canbus LEDs. Canbus LEDs have loading resistors in them (I think) that allows the truck to tell there is a good bulb in there.
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I'm pretty sure you just need to make sure you are using canbus LEDs. Canbus LEDs have loading resistors in them (I think) that allows the truck to tell there is a good bulb in there.
As long as you have Autoride removed and the correct springs installed.
Tonyrodz
Resident Resident
No autoride, and I'm using Crown Suspension lowering springs with shackles.
BigDaddy13440
Full Access Member
I'll have to take exception to that!
I AM a General Contractor, and subcontract for Lowe's doing installs for three stores. Mostly do door installations, but also countertops, tile, bathroom fixtures, and full kitchen renovations.
My XL IS my work truck.
BigDaddy13440
Full Access Member
Just picked my XL up from Goodyear, my front brakes were toast.... as in metal to metal. Mechanic hit the old rotors with a hammer and they shattered.
Luckily, as I'd mentioned elsewhere, I found a set of EBC rotors and Greenstuff pads on Craigslist locally. He said he'd bought them from Jegs for his truck, and wound up trading it in before he put them on. Had them listed at $200, they are over $400 if buying from Jegs - I offered $150 and he quickly agreed.
Luckily, as I'd mentioned elsewhere, I found a set of EBC rotors and Greenstuff pads on Craigslist locally. He said he'd bought them from Jegs for his truck, and wound up trading it in before he put them on. Had them listed at $200, they are over $400 if buying from Jegs - I offered $150 and he quickly agreed.
You should be good to go with the Bilsteins.
#1taho
5150TAHO
Bilstein said they were for stock height trucks.
But I am sure there is a different model available for lowered. I will call tomorrow and find out
Tonyrodz
Resident Resident
Thx alot guys, i really appreciate it.
CamReynolds
Full Access Member
- Joined
- May 15, 2017
- Posts
- 341
- Reaction score
- 164
still a good work truck. you mind if i pm you about the job?
4600's are for stock height or lowered vehicles and 5100 's are for lifted.
