What did you do to your OBS GMT400 Tahoe/Yukon Today?
- Thread starter 96ProCompTahoe
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
dkknaebel
Keeping LKQ in business
I replaced the VSS that sits on the transmission. This is the rock auto part I used - ULTRA-POWER 5S4668. It sits on the left side of your transmission, easy enough to reach when it is on the ground. Just unclip the harness, and an adjustable wrench and you'll be good to go.
The MC I will be using will not be the hydro boost, its the standard MC from the NBS (02 Silvy)
Installed my overhead console tonight. Even found the wires for the map lights tucked away so it was just a matter of cutting the holes for the rear clips, pulling the map light plug up to the front and swapping the rear heat/ac controls( i know mine works so keeping the other for back up). Headliner was a pita but got it done in a few hours. Here is the finished look and some along the way pics.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Kelsda
Full Access Member
Installed a rear view mirror with temp n camera much needed for hooking up trailers
Holt50
Full Access Member
- Joined
- Jun 28, 2017
- Posts
- 116
- Reaction score
- 42
Calipers
Kelsda
Full Access Member
Washed in and out
Thats a clean machine! I need a GT in my life.
