Wheel Spacer sizing

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DWSmoot

Full Access Member
Joined
Jul 22, 2017
Posts
531
Reaction score
439
Location
Charleston, SC
Thinking about potentially adding some BORA hub centric wheel spacers. Does anyone have experience with and/or know the smallest spacers that can be run on these wheels without cutting studs?

13F172B8-8254-42FA-AF84-4B7E891E4193.jpeg
 

Bigmac18

Full Access Member
Joined
Oct 27, 2014
Posts
168
Reaction score
117
Yup... 1.75" Bora spacers were made specifically for the GM stud length
 

Bigmac18

Full Access Member
Joined
Oct 27, 2014
Posts
168
Reaction score
117
It will push your wheel out about 44mm from where it is now, so depending on the offset of your stock wheels (+31mm?) you're probably close to a -12 offset wheel

I am running a 2" spacer with stock wheels (20x8.5 +31) and 305s just for some comparison:
full
 
OP
OP
DWSmoot

DWSmoot

Full Access Member
Joined
Jul 22, 2017
Posts
531
Reaction score
439
Location
Charleston, SC
It will push your wheel out about 44mm from where it is now, so depending on the offset of your stock wheels (+31mm?) you're probably close to a -12 offset wheel

I am running a 2" spacer with stock wheels (20x8.5 +31) and 305s just for some comparison:
full
Thanks BigMac. My wheels are 22x9 24 offset. Your setup looks good. Concerned mine would push out more even with a 1.5 spacer. Do you have any other pics at different angles?
 

Bigmac18

Full Access Member
Joined
Oct 27, 2014
Posts
168
Reaction score
117
with a 20x9 +24 wheel and 1.75" spacers, yours will stick approx 1/4" further out than mine pictured.
 

Forum statistics

Threads
128,786
Posts
1,805,392
Members
91,765
Latest member
AT4Hunter
Top