Door Popper instal for tahoe Barn Doors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ladorn45

Full Access Member
Joined
Oct 29, 2014
Posts
282
Reaction score
68
Hey Everyone,


I finally got around to installing a door popper in my 2001 Tahoe barn doors. I figured out a way to use the existing wires in the door by using a relay timer. I basically set it up so you hold the unlock button for three seconds and it triggers the door popper. Whats nice with this is you can pop the door from the front seat or from the switch located in the back. Pretty simple to install and figured I do a write up for anyone interested in doing this. This idea can probably be adapted to the older Tahoes as well as any other door.





I am going to split this write up into three parts so people can skip sections.


1 Taking the door panel off

2. Installing the door actuator

3. Wiring the door actuator.





1 Taking the door panel off


The door has two panels that need to be removed. You want to remove the top panel first working from the bottom of that panel (middle of the door) and working your way up. I posted some pics to give you a idea of how it clips in.
IMG_20171015_192111498.jpg 1_door pannel.jpg 2_Door Panel.jpg


The bottom panal just simply lifts up.

9_door panel.jpg 3- Door Panel.jpg
 
Last edited:
OP
OP
L

ladorn45

Full Access Member
Joined
Oct 29, 2014
Posts
282
Reaction score
68
2. Installing the Door Actuator.


This is the actuator that I purchased off amazon.

https://www.amazon.com/gp/product/B00PWLJ2OC/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1


I used a bike brake cable for the pull cable, something similar to this:

https://www.evanscycles.com/fwe-stainless-steel-inner-gear-cable-for-shimano-sram-EV266109


First you want to remove the two torq bolts off the locking mechanism on the Tahoe door.
IMG_20171015_192120255.jpg IMG_20171015_192124823.jpg



Once you pull the locking mechanism from the door you will see a cable that connects to a lever. This is the lever that pops the door open. I ran the bike cable through the lever’s hole.
5_Locking Mechanism.jpg 4_Locking Mechanism.jpg

Next I mounted the actuator by drilling two holes into the door and connected the pull cable.
6_door acuator.jpg

Next wiring everything up
 
OP
OP
L

ladorn45

Full Access Member
Joined
Oct 29, 2014
Posts
282
Reaction score
68
3. Wiring the door actuator.

Keep in mind when the door is open none of the wires have power. So when testing you have to have the door closed. Learned the hard way.


In order to have the door pop open after holding the unlock button for three seconds you need to install a timer relay. This is the one I used.


https://www.amazon.com/gp/product/B0126WT5QO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1


In order to power the relay and the door actuator I tapped the Tahoe unlock cable. Which is a tan wire.
7_power wire tap.jpg

Next you have to ground the relay as well as the door actuator. Tap into the dome light cable for your ground. Normally I would connect the ground to a bolt, but I noticed all the bolts on the doors did not create a good enough ground. You will find a plug that has a black cable and a green cable. You want to tap into the black wire for your ground.
8_ground wire.jpg

Finally here is the wire schematic in how I wired the relay. I also installed a 10amp fuse between the relay and door lock power wire.
9_skematics_2.jpg
After everything is wired up adjust the dial on the relay to how long you want to hold the unlock button for in order to trigger the relay. Thats it Hopefully this helps someone out or sparks another idea. Also the green wire is a constant 12 volt so if you just want to simply hook up a push button the the door and avoid the relay thing timer that should work as well.
 
Last edited:
OP
OP
L

ladorn45

Full Access Member
Joined
Oct 29, 2014
Posts
282
Reaction score
68
Couple of things I got third row seats and sometimes I just put one of the seats in so the person in the back has another way out. Sometimes I lock my self in like an ******, and finaly I camped in my car one night and noticed it's a pain in the ass too get out from the side. Also for 20 bucks it's a useful mod for me.
 

YukonXL04

The Riverboat
Supporting Member
Joined
Sep 3, 2013
Posts
2,489
Reaction score
175
Location
Arlington, TX
Couple of things I got third row seats and sometimes I just put one of the seats in so the person in the back has another way out. Sometimes I lock my self in like an ******, and finaly I camped in my car one night and noticed it's a pain in the ass too get out from the side. Also for 20 bucks it's a useful mod for me.

Oh well that's cool. Yea I was wondering the motive behind it.
 

bottomline2000

Full Access Member
Joined
Oct 21, 2009
Posts
1,722
Reaction score
987
Location
Dallas, TX
Very cool and if you have barn doors u will understand. Nothing like being locked in the cargo area of your truck lol.

Sent from my SAMSUNG-SM-T377A using Tapatalk
 

Forum statistics

Threads
128,802
Posts
1,805,640
Members
91,785
Latest member
Eliteweapons
Top