Electric fan swap

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dubfreaks

Member
Joined
Apr 19, 2017
Posts
74
Reaction score
54
Location
Philly
03 Tahoe with a clutch fan, can't keep this thing coil enough for cold air unless I'm moving. Tried 3 different fan clutches, in currently running an OEM Ac Delco clutch and still same issue. I'm considering changing to an electric fan and looking for some feedback on the pros and cons ..

Sent from my SM-G955U using Tapatalk
 

bottomline2000

Full Access Member
Joined
Oct 21, 2009
Posts
1,722
Reaction score
987
Location
Dallas, TX
Pros- cooler ac even when idling, no more noisey clutch fan, possible better fuel mileage, better throttle response, freed up hp..

Cons-cost to do the conversion..

Honestly with an 03+ truck it's a no brainer if your willing to buy fans, harness and pay to activate pins for fan control. U don't need a tune to do this but most get it done while being tuned.

Sent from my SAMSUNG-SM-T377A using Tapatalk
 
OP
OP
dubfreaks

dubfreaks

Member
Joined
Apr 19, 2017
Posts
74
Reaction score
54
Location
Philly
I was told the harness is already there in my Truck.. I can get the fans at my buddies junk yard.

Sent from my SM-G955U using Tapatalk
 

bottomline2000

Full Access Member
Joined
Oct 21, 2009
Posts
1,722
Reaction score
987
Location
Dallas, TX
I was told the harness is already there in my Truck.. I can get the fans at my buddies junk yard.

Sent from my SM-G955U using Tapatalk
That would be a first unless someone added it. If so, your pins may already be activated..just add fans..factory fans didn't start until 05.

Sent from my SAMSUNG-SM-T377A using Tapatalk
 

mizzouguy

Full Access Member
Joined
Apr 7, 2015
Posts
523
Reaction score
153
Location
Lake of the Ozarks, MO
None of the harness will be there. If you can get the fans from a junk yard, just get the factory harness and relay panel out of the same truck. Then you dont have to buy a harness from blackbear or whoever and all you have to do it get your computer tuned to turn them on and off.
OR....you can just add an auxillary fan like I did. Don't have to do any tuning. I can send pictures...
 
OP
OP
dubfreaks

dubfreaks

Member
Joined
Apr 19, 2017
Posts
74
Reaction score
54
Location
Philly
None of the harness will be there. If you can get the fans from a junk yard, just get the factory harness and relay panel out of the same truck. Then you dont have to buy a harness from blackbear or whoever and all you have to do it get your computer tuned to turn them on and off.
OR....you can just add an auxillary fan like I did. Don't have to do any tuning. I can send pictures...
Just a fan with a switch? Pics please

Sent from my SM-G955U using Tapatalk
 

mizzouguy

Full Access Member
Joined
Apr 7, 2015
Posts
523
Reaction score
153
Location
Lake of the Ozarks, MO
It is actually an oem part from an older hd model. https://www.amazon.com/ACDelco-15-8686-Original-Equipment-Auxiliary/dp/B0012PM154 is the fan assembly. http://www.ebay.com/itm/NEW-GM-COOLING-FAN-HARNESS-OEM-88880045-/160862845754 is the harness you need. Sorry if the pictures suck it's kinda hidden behind the grill. Upper bracket has to be bent different to fit the upper radiator support, mine is now riveted in the upper and lower bracket. Relay harness trigger wire goes to the ac clutch trigger wire on the bottom of the fuse panel. Relay power wire goes to power stud in fuse box. Relay ground goes to mounting bracket. Relay output wire goes to fan harness. Fan harness ground I put to trans cooler bracket. Hope this helps. Big difference in ac temp at idle compared to before.
IMG_9926.jpg
IMG_9927.jpg
IMG_9930.jpg
IMG_9931.jpg
 

01ssreda4

Full Access Member
Joined
Feb 28, 2014
Posts
1,124
Reaction score
485
I got the Nelson harness and added the settings in the pcm with hptuners. Love them, it's like a factory install, controllable, and works perfect.
 

Murderhoe

TYF Newbie
Joined
Aug 27, 2016
Posts
10
Reaction score
10
There are a lot of options just depends how far you want to go.

20161121_123909.jpg
 

Forum statistics

Threads
129,105
Posts
1,810,362
Members
92,180
Latest member
Bekahgentry

Latest posts

Top