2007 Drivers side blend door cleaning!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

2011SSVHOE

I'm an egual oportunity offender
Joined
Dec 2, 2016
Posts
1,395
Reaction score
996
Location
The Heart of The Triad, North Carolina
Ok I know this is an old thread but so am I, anyhow I've tried the reset trick with not much luck . Passenger side blows cold , drivers side not so cold. I am trying to figure out the location of the driver side blend door actuator, It looks like you have an upper one and a lower one , hope someone can help or have a picture would be even better


2011 with dual zone !!!
 

2011SSVHOE

I'm an egual oportunity offender
Joined
Dec 2, 2016
Posts
1,395
Reaction score
996
Location
The Heart of The Triad, North Carolina
all right, I just got done cleaning the grease out of the l/h blend door actuator. Super easy took about 35 minutes. there is an index mark on the outside case , I also moved the gear one notch to the cold just to be sure. I figured I saved 152.00 dollar on the part and a minimum of 200.00 or more on labor at the dealer. Oh just for the record the drivers actuator is the one on the bottom,
 

muncie21

Full Access Member
Joined
Sep 25, 2010
Posts
146
Reaction score
66
That 3rd bolt is a *****! Especially if you have a center console. I removed the first two, no problem. Spent about 30 minutes squeezing my hand between the plastic of the center console and the tunnel, said F-it, fall is coming, this can wait another year :0
 

GranPrix

Full Access Member
Joined
Sep 10, 2017
Posts
696
Reaction score
460
Did this just now, took about a total of 30 mins. Working perfectly now.
 

Forum statistics

Threads
128,802
Posts
1,805,655
Members
91,785
Latest member
Eliteweapons
Top